3 Computational Model
Mostrando 1-12 de 171 artigos, teses e dissertações.
-
1. Implementation of ventilation towers in a greenhouse established in low altitude tropical climate conditions: numerical approach to the behavior of the natural ventilation
ABSTRACT Deficient ventilation rates and airflow patterns in naturally ventilated greenhouses are the main causes for the generation of inadequate and heterogeneous thermal conditions inside this type of structure. In this research, a numerical study was developed using a two-dimensional computational fluid dynamics model validated in a Colombian greenhouse
Rev. Ceres. Publicado em: 2021-02
-
2. Computational Verification of the NBR 15.220-3 Recommendations for Thermal Comfort in the City of Curitiba
Abstract The Brazilian Standard for Thermal Performance and Bioclimatic Zoning (NBR 15.220-3) establishes twelve strategies to achieve thermal comfort inside buildings considering the dry bulb temperature and the predominant humidity in each climate. These strategies are visualized in the Bioclimatic Charts of Brazil main cities. This study seeks, through c
Braz. arch. biol. technol.. Publicado em: 25/11/2019
-
3. Optimization in timetabling in schools using a mathematical model, local search and Iterated Local Search procedures
Resumo Este artigo aborda o problema de otimização na geração da grade horária escolar. Tal problema consiste em definir os dias e horários das disciplinas a serem ministradas por cada um dos professores de instituições de ensino. Para isto foi desenvolvida uma ferramenta que faz uso de técnicas de Pesquisa Operacional (PO), com foco na geração e
Gest. Prod.. Publicado em: 07/10/2019
-
4. Diagnosis and validation by computational fluid dynamics of poultry house with negative pressure ventilation
RESUMO A ventilação à pressão negativa em aviários vem sendo utilizada para viabilizar a correção de seus microclimas internos, sendo que pesquisas apontam para a distribuição heterogênea do ar ao longo dos galpões e inadequação das variáveis ambientais às faixas recomendadas para o conforto térmico de aves adultas, especialmente nas horas ma
Rev. bras. eng. agríc. ambient.. Publicado em: 09/09/2019
-
5. Physical and geometric non-linear analysis using the finite difference method for one-dimensional consolidation problem
Abstract This article presents a numerical model based on the finite difference method for the physical and geometric non-linear analysis of a one-dimensional consolidation problem regarding a saturated, homogeneous and isotropic soil layer with low permeability and high compressibility. The problem is formulated by adopting the void ratio as the primary var
REM, Int. Eng. J.. Publicado em: 2019-06
-
6. Efeitos do uso de diferentes tecnologias educacionais na aprendizagem conceitual sobre o sistema miofuncional orofacial
RESUMO Objetivo Comparar três métodos de aprendizagem sobre anatomia e fisiologia do sistema miofuncional orofacial, sendo dois interativos (uso de softwares educacionais) e um tradicional, quanto à aprendizagem conceitual de estudantes de graduação em Fonoaudiologia. Métodos Participaram 36 estudantes do segundo ano, alocados randomicamente em grupo
Audiol., Commun. Res.. Publicado em: 09/05/2019
-
7. Three-dimensional numerical simulation of flow in vertical slot fishways: validation of the model and characterization of the flow
RESUMO As escadas para peixes com ranhuras verticais permitem que ocorra a dissipação da energia do escoamento em função da forma da bacia, dos defletores, da declividade longitudinal e da largura da ranhura vertical. Estas estruturas devem apresentar padrões médios e turbulentos do escoamento compatíveis com os peixes que irão transpô-la. Tipicame
RBRH. Publicado em: 11/04/2019
-
8. Fuzzy logic and hospital admission due to respiratory diseases using estimated values by mathematical model
Resumo Internações por doenças respiratórias geram custos financeiros para o Sistema de Saúde além de custos sociais. O objetivo deste estudo foi elaborar e validar um modelo linguístico “fuzzy” para previsão do número de internações por doenças respiratórias. Foi construído um modelo “fuzzy” para predição de internações por pneumon
Ciênc. saúde coletiva. Publicado em: 2019-03
-
9. Optimal design of beam-column connections of plane steel frames using the component method
Abstract This paper presents a methodology for optimization of beam-column connections of plane steel frames. The objective is to obtain beam- column connections mechanically more efficient and with minimum cost by determination of the optimal dimensions for the components of the connection; satisfying mechanical constraints associated with the bending momen
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
10. Analysis of sensor placement in beams for crack identification
Abstract A previous study has shown that the mode shapes of a beam are more sensitive to damage than other vibrational parameters, thus making them better suited for crack identification purposes. However, they have the disadvantage of being more difficult to be measured. To overcome this difficulty, an interesting idea is to monitor changes produced by crac
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
11. Diseño, simulación y análisis del proceso de extrusión de un perfil termoplástico en PVC rígido para optimizar el diseño de la matriz y los parámetros
ABSTRACT The objective of the present work was to verify and optimize the die design to manufacture a thermoplastic profile in rigid PVC using the simulation of the flow in the mentioned matrix through the use of Computational Fluid Dynamics (CFD) and through tests in extrusion, using an experimental calibrator, the required geometry and dimensions were obta
Matéria (Rio J.). Publicado em: 19/07/2018
-
12. VALIDATION OF COMPUTATIONAL METHODS APPLIED IN MOLECULAR MODELING OF CAFFEINE WITH EPITHELIAL ANTICANCER ACTIVITY: THEORETICAL STUDY OF GEOMETRIC, THERMOCHEMICAL AND SPECTROMETRIC DATA
Models validation in QSAR, pharmacophore, docking, and others, can ensure the accuracy and reliability of future predictions in design and selection of molecules with biological activity. In these study, the caffeine molecule was optimized using Hartree-Fock (HF) and Density Functional Theory (DFT/B3LYP) methods, with seven basis sets. Linear correlation dat
Quím. Nova. Publicado em: 2018-07