3 Microns
Mostrando 1-12 de 541 artigos, teses e dissertações.
-
1. Preparation of Poly(3-hydroxybutyrate-b-ε-caprolactone) by Reactive Extrusion and Production of Electrospun Fibrous Mats
Poly(3-hydroxybutyrate) (PHB) has been proposed to be a potential candidate to be used as biomaterial. However, its poor processability, high brittleness and rigidity have limited its applicability. Transesterification reactions with poly(ε-caprolactone) (PCL), one of the most promising biomedical materials, emerge as an attractive alternative to improve it
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
2. Local piezo-response for lead-free Ba0.9Ca0.1Ti0.9Zr0.1O3 electro-ceramic by switching spectroscopy
The purpose of this work is to determine the effective piezoelectric coefficient (d33) and the macro ferroelectric hysteresis behavior for the Ba0.9Ca0.1Ti0.9Zr0.1O3 (BCZT). The sample was prepared by the modified Pechini method and it was sintered at 1250 ºC for 5 h. The refinements of X-ray diffraction (XRD) patterns obtained by the Rietveld method sugges
Mat. Res.. Publicado em: 11/01/2018
-
3. Deleterious effects of prepubertal corticosterone treatment on rat prostate
PURPOSE:To investigate the structural and functional changes induced by corticosterone (CORT) in the ventral prostrate (VP) of rats in order to study chronic stress effects in the prepubertal phase.METHODS:Wistar rats received daily saline or CORT injections during the pubertal period from the 5th to 25th day of postnatal life. The animals were distributed i
Acta Cir. Bras.. Publicado em: 2015-06
-
4. Impact of particle size, thermal processing, fat inclusion, and moisture addition on starch gelatinization of broiler feeds
The present study evaluated the effect of feed particle size, thermal processing different levels of fat inclusion and of moisture addition on the amount of gelatinized starch in a corn-soybean broiler diet. The different processing factors were combined in a 2 x 4 x 4 x 2 factorial arrangement in a three randomized block design consisting of three productio
Rev. Bras. Cienc. Avic.. Publicado em: 2014-12
-
5. Avaliação da resposta da injeção intravítrea de ranibizumab em pacientes com neovascularização de coróide da degeneração macular relacionada à idade com atrofia geográfica extensa pré-existente e revisão da literatura
Investigar os resultados da injeção intravítrea de Ranibizumab em pacientes com neovascularização de coróide da degeneração macular relacionada a idade, com atrofia geográfica extensa, pré-existente e revisão da literatura. MÉTODOS: Este é um artigo de revisão e também um estudo retrospectivo de 9 pacientes, 10 olhos com neovascularização de
Rev. bras.oftalmol.. Publicado em: 2012-12
-
6. Quantification of drugs with antimicrobial activity by high performance liquid chromatography coupled to mass spectrometry (LC-MS/MS): application in studies of comparative pharmacokinetics. / QuantificaÃÃo de fÃrmacos com atividade antimicrobiana em plasma humano por cromatografia lÃquida de alta eficiÃncia acoplada à espectrometria de massa (LC-MS/MS): aplicaÃÃo em estudos de farmacocinÃtica comparada
Two robust, fast and sensitive methods for quantification of sulfamethoxazole (SMX), trimethoprim (TMP) and sulfadiazine (SDZ) in plasma using high performance liquid chromatography coupled to mass spectrometry (LC-MS/MS) was developed and validated. The methods involved liquid-liquid extraction with ethyl acetate using metoprolol and sulfamethoxazole as int
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 31/10/2011
-
7. Investigação da microarquitetura óssea através de microtomografia 3D / Investigation of bone microarchitecture using 3D microtomography
X-Ray Computed Microtomography (uCT) is a nondestructive technique used to study the internal structure of bones with a spatial resolution of the order of microns. In this study, six pairs of bone samples (femur mouse) were studied by uCT. The tests were conducted in the absence or presence of aluminum filters (thickness of 0.25, 0.50 and 0.75 mm), using thr
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/06/2011
-
8. Ambientes de cultivo, recipientes e substratos na produção de biomassa foliar e radicular em mudas de maracujazeiro amarelo em Aquidauana - MS
Conduziu-se este trabalho, com o objetivo de avaliar os efeitos de diferentes tipos de ambientes protegidos, tipos de recipientes e composições de substratos no acúmulo de biomassa em mudas de maracujazeiro amarelo (Passiflora edulis Sims f. flavicarpa Deg.) na região do Pantanal, nos meses de setembro a novembro de 2006. Utilizaram-se quatro ambientes p
Ciência e Agrotecnologia. Publicado em: 2010-04
-
9. Eficácia da utilização de grânulos de argila como veículo para a aplicação aérea de sulfentrazone e isoxaflutole em área de implantação de eucalipto
Realizou-se um experimento em uma área de implantação da cultura do eucalipto no município de São Miguel Arcanjo-SP, com o objetivo de avaliar a eficácia da aplicação aérea de grânulos de argila como veículo dos herbicidas sulfentrazone e isoxaflutole, no controle de plantas daninhas. Foi realizada aplicação aérea dos herbicidas sulfentrazone,
Planta Daninha. Publicado em: 2010
-
10. Estudo, desenvolvimento e otimização de um Laser de ER3+:YLF emitindo na região de 3m bombeado por diodo / STUDY, DEVELOPMENT AND OPTIMIZATION OF A DIODE PUMPED Er3+:YLF LASER EMMITING IN THE 3m REGIO
In this work we present the development of a laser system based on an Er:YLF Brewster cut crystal with 15mol% erbium at the yttrium site, emitting at 3 m and pumped by a laser diode emitting at 975 nm. Using this system we obtained 1,80(18) W peak power when operating in the quasi-continuous regime. The cavity is optimized for medical applications and to ope
Publicado em: 2008
-
11. Tratamento de varizes dos membros inferiores com laser endovenoso em pacientes com ulcera em atividade e medida das temperaturas intra e perivenosas durante o procedimento / Endovenous laser treatment for varicose veins in patients with active ulcers. Measurement of intravenous and perivenous temperatures during the procedure
Este estudo foi desenvolvido para avaliar, prospectivamente, os resultados do tratamento de varizes com úlcera em atividade com laser endovenoso (EVL), comparando com um grupo sob tratamento clínico, durante um ano. Foram estudados 52 pacientes consecutivos portadores de varizes com úlcera em atividade há mais de um ano, divididos em dois grupos aleatór
Publicado em: 2007
-
12. Characterization of a microvalve using the piezoelectric polymer poly(viniyidene fluoride) (PVDF) integrated to a micronozzle end / Caracterização de uma microválvula fabricada usando o polímero piezoelétrico poli(fluoreto de vinilideno) (PVDF) integrada a saída de um microbocal sônico
This work describes the fabrication and test of a microvalve integrated in a micronozzle. The technique used to fabricate the micronozzles was powder blasting using aluminum oxide powder and glass as substrate. The microvalves are actuators made from PVDF (poli(vinylidene fluoride)), that is a piezoelectric polymer. The micronozzles have convergent-divergent
Publicado em: 2007