Age Hardening
Mostrando 1-6 de 6 artigos, teses e dissertações.
-
1. On the effect of interrupted ageing (T6I4) on the mechanical properties of AA6351 and AA7050 alloys
Abstract The mechanical properties of age-hardenable aluminum alloys are strongly influenced by the volume fraction, size and spacing of hardening precipitates. In addition, researches have shown that interrupted ageing (T6I4) could benefit the hardening response of these alloys. Interrupted ageing is a term generally used for the microstructural developmen
REM, Int. Eng. J.. Publicado em: 2021-01
-
2. Evaluation of a 7050-TAF aluminum alloy submitted to creep age forming
CAF process combines creep and precipitation hardening which are highly dependent on time and temperature. The aging cycle relax the stresses induced during the loading phase. At the end of the process stress relaxation induces shape changes in the part but significant spring back is observed (about 70%). Usually CAF cycles for 7XXX alloys use times around 2
Mat. Res.. Publicado em: 29/04/2014
-
3. Age-hardenability and related microstructural changes during and after phase transformation in an Au-Ag-Cu-based dental alloy
The aim of this study was to clarify how the microstructural changes during and after phase transformation determine the age-hardenability of an Au-Ag-Cu-based dental alloy. The rapid increase in hardness in the initial stage was the result of rapid atomic diffusion by spinodal decomposition into metastable Ag-rich' and Cu-rich' phases. The constant hardenin
Mat. Res.. Publicado em: 04/12/2012
-
4. Effect of heat treatment on some mechanical properties of 7075 aluminium alloy
This paper reports the effects of annealing and age hardening heat treatments on the microstructural morphology and mechanical properties of 7075 Al alloy. The material was cast in the form of round cylindrical rods inside green sand mould from where some samples were rapidly cooled by early knockout and others gradually cooled to room temperature. From the
Mat. Res.. Publicado em: 04/12/2012
-
5. Age-hardening of Ti-35Nb-7Zr-5Ta alloy for orthopaedic implants
Bone injuries and failures often require the inception of implant biomaterial. Research in this field has received increasing attention recently. In particular, porous metals are attractive due to its unique physical, mechanical, and new bone tissue ingrowth properties. The aim of this work is to investigate age hardening behavior of Ti-35Nb-7Zr-5Ta alloy pr
Materials Research. Publicado em: 2007-09
-
6. Operational performance of a subsoiler as a function of the structure, clay and moisture content in three latosols. / Desempenho operacional de um subsolador em função da estrutura, do teor de argila e de água em três latossolos.
A rápida evolução tecnológica da silvicultura brasileira, verificada na década de 80, culminou com o sistema de cultivo mínimo do solo, implantado em grande escala a partir do início da década de 90. Levantamentos recentes junto a empresas florestadoras de expressão nacional, indicaram que cerca de 77% da área plantada é realizada no sistema de cu
Publicado em: 2005