Aluminum Nitride
Mostrando 1-12 de 21 artigos, teses e dissertações.
-
1. Avaliação dos processos de fratura em filmes finos através da simulação de ensaios de indentação com penetradores esféricos
RESUMO Recentes trabalhos propõem a utilização dos ensaios de indentação como uma ferramenta capaz de avaliar características mecânicas de filmes finos, assim como avaliar possíveis falhas em sistemas que conjugam filmes de alta dureza depositados em substratos metálicos em solicitações tribológicas. Entretanto, a implementação da técnica de i
Matéria (Rio J.). Publicado em: 25/11/2019
-
2. Thermomechanical Characteristics of a Functionally Graded Mounted Uniform Disc with/without Rigid Casing
ABSTRACT In the present paper, thermomechanical attributes of a power-law graded uniform mounted disc with or without rigid casing are investigated analytically under centrifugal and steady-state thermal loads within the framework of axisymmetric infinitesimal plane-stress elasticity theory. Young's modulus, material density, thermal expansion coefficient an
J. Aerosp. Technol. Manag.. Publicado em: 13/06/2019
-
3. Efeito da mesogeometria da broca e das condições de lubrirrefrigeração sobre o acabamento do furo em aço ARBL DIN S700MC
RESUMO O trabalho apresenta um estudo sobre os efeitos decorrentes da modificação da mesogeometria de uma broca helicoidal de metal-duro com revestimento de TiAlN sobre o acabamento superficial do aço de alta resistência e baixa liga DIN S700MC utilizando diferentes condições de aplicação de fluidos lubrirrefrigerantes (em abundância, em mínima qua
Matéria (Rio J.). Publicado em: 20/05/2019
-
4. Study of aluminum nitride precipitation in Fe- 3%Si steel
For good performance of electrical steels it is necessary a high magnetic induction and a low power loss when submitted to cyclic magnetization. A fine dispersion of precipitates is a key requirement in the manufacturing process of Fe- 3%Si grain oriented electrical steel. In the production of high permeability grain oriented steel precipitate particles of c
Mat. Res.. Publicado em: 11/06/2013
-
5. Influence of the microstructure on the electrochemical properties of Al-Cr-N coatings deposited by co-sputtering method from a Cr-Al binary target
In the present paper, aluminum chromium nitride (Al-Cr-N) films were deposited onto AISI H13 steel substrates by a reactive d.c magnetron co-sputtering system in an atmosphere of Ar/N2 (90/10) gas mixture from a binary target composed of chromium (99.95%) and aluminum (99.99%). Different powers (40, 50, 60, and 70 W) were applied to the target, in order to s
Mat. Res.. Publicado em: 04/12/2012
-
6. Deposição de A/N por sputtering não reativo
Neste trabalho depositamos via magnetron sputtering de rádio-frequência não reativo nanofilmes de nitreto de alumínio (AlN). Os nanofilmes de nitreto de alumínio são materiais semicondutores com alta condutividade térmica, elevado ponto de fusão, piezoeletricidade e largo "bandgap"(6;2 eV) com estrutura cristalina wurtzítica hexagonal, pertencentes
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/01/2011
-
7. Estudo das propriedades opto-eletrônicas de micro-cristais de rubi / Study of opto-electronics properties of ruby micro-crystals
Films of amorphous aluminum-nitride (AlN) were prepared by conventional radio frequency sputtering of an Al+Cr target in a plasma of pure nitrogen. The Cr-to-Al relative area determines the chromium content, which stayed in the ~ 0 3.33 at.% concentration range in the present study. Film deposition was followed by thermal annealing the samples up to 1050 ºC
Publicado em: 2010
-
8. Estudo de materiais piezoelétricos da família III-V obtidos por sputtering reativo visando sua aplicação em sensores e MEMS. / Study of III-V piezoelectric materials obtained by reactive sputtering for sensors and MEMS applications.
Neste trabalho, apresento um estudo sobre a fabricação e caracterização físico-química de filmes finos de nitreto de alumínio (AlN) obtidos pela técnica de pulverização catódica reativa por rádio frequência (r.f sputtering) utilizando um alvo de alumínio puro. Visto que o AlN é um material que apresenta piezoeletricidade e compatibilidade com
Publicado em: 2010
-
9. Influence of additive system (Al2O3-RE2O3 , RE = Y, La, Nd, Dy, Yb) on microstructure and mechanical properties of silicon nitride-based ceramics
Silicon nitride based ceramics have been widely used as structural ceramics, due mainly to their thermo-mechanical properties such as high density, high thermal shock resistance, corrosion resistance and chemical stability. The aim of this study was to determine the influence of rare earth and aluminum oxide additions as sintering aids on densification, micr
Materials Research. Publicado em: 2009-06
-
10. Internal turning for cylinder liners made of centrifuged gray cast iron / Torneamento interno de cilindros automotivos de ferro fundido cinzento centrifugado
This investigation describes and shows an unprecedented machining process to be used for manufacturing cylinder liners, which are very important parts used in aluminum engine blocks for automobiles. There are few known companies that manufacture this kind of component, and until now, all of them use a boring process to machine the internal diameter of the cy
Publicado em: 2009
-
11. IMPLEMENTAÇÃO DA TÉCNICA DE FOTOACÚSTICA DE CÉLULA ABERTA PARA OBTENÇÃO DA DIFUSIVIDADE TÉRMICA DE METAIS
The photo-acoustic technique has become a standard photo-thermal method for carrying out diverse studies on solids materials. Photo-thermal phenomena in solids results from a combination of thermal expansion, thermal diffusion, and thermo-elastic bending effects and can be obtained by c k . r a = where k is the thermal conductivity, r is the density, and c i
Publicado em: 2009
-
12. Isolantes de porta com altas constantes dieletricas (High K) para tecnologia MOS / High K gate insulators for MOS technology
High k insulators for the next generation (sub-32 nm CMOS (complementary metaloxide-semiconductor) technology), such as titanium oxide (TiOx), titanium oxynitride (TiOxNy), titanium-aluminum oxynitride (AlxTiwOyNz), titanium-aluminum nitride (AlxTiwNz) and titanium-aluminum oxide (AlxTiwOy), have been obtained by Ti or Ti/Al e-beam evaporation, with addition
Publicado em: 2008