Anisotropic
Mostrando 1-12 de 342 artigos, teses e dissertações.
-
1. Freeze-casting applied to ceramic materials: a short review of the influence of processing parameters
Abstract In recent years there is a high interest in the freeze-casting process because it is a simple, economical, and environmentally friendly method for obtaining highly porous materials. Most of the materials obtained by this technique have directional pore structure and anisotropic properties. However, a wide range of pore size and morphology can be obt
Cerâmica. Publicado em: 2021-03
-
2. New Strategy for Streptavidin Detection Using AuNRs/PAAm Hydrogel Composites
Localized surface plasmon resonance (LSPR) is a collective oscillation of free electrons induced by the incident light in nanometric surfaces of conductive materials. Gold nanorods (AuNRs) have been studied for plasmonic devices due to their anisotropic properties. Herein, we report the construction of a specific biosensor using polyacrylamide (PAAm) as the
J. Braz. Chem. Soc.. Publicado em: 2020-09
-
3. Effect of high petroleum coke additions on metallurgical coke quality and optical texture
Abstract The objective of the present study was to evaluate the effect of high additions of petroleum coke on the rheological properties of coking coal and the quality of cokes produced on pilot scale at the Usiminas R&D Center. For this purpose, blends using petroleum coke additions of 5%, 10%, 20%, 30% and 40% were produced. The results showed that the ble
REM, Int. Eng. J.. Publicado em: 2020-06
-
4. Data processing within rows for sugarcane yield mapping
ABSTRACT: The mapping of sugarcane yield is still not as widely available as it is for grain crops. Sugarcane harvesters cut and process the cane in a single or maximum of two rows, facilitating the monitoring of cane yield and its behavior on a small scale. This study tested a method for sugarcane yield data cleaning, investigating if the data recording fre
Sci. agric. (Piracicaba, Braz.). Publicado em: 20/12/2019
-
5. Hidrodinâmica relativística: a representação de diversos fluidos em relatividade geral
Resumo O tensor de momento-energia é a entidade matemática que representa de forma unificada as fontes de momento e energia no formalismo covariante, tanto em espaços planos, como em espaços curvos. Em espaços curvos o tensor de momento-energia fica conectado a curvatura do espaço-tempo via equação de campo de Einstein. O tensor de momento-energia ca
Rev. Bras. Ensino Fís.. Publicado em: 04/11/2019
-
6. Influence geometric anisotropy in management zones delineation
RESUMO O manuseio adequado do solo, além de permitir a redução de contaminantes e a maximização da produtividade agrícola, está diretamente relacionado ao conhecimento da variabilidade espacial dos atributos do solo. Esta variabilidade espacial pode expressar-se de forma isotrópica e anisotrópica. Sendo a última, negligenciada nas pesquisas relacio
Rev. Ciênc. Agron.. Publicado em: 04/11/2019
-
7. Large deflection and initial instability analysis of anisotropic plates by the generalized finite element method
Abstract This paper presents investigations laminated plates under moderately large transverse displacements and initial instability, through the Generalized Finite Element Methods - GFEM. The von Kármán plate hypothesis are used along with Kirchhoff and Reissner-Mindlin kinematic plate bending models to approximate transverse displacements and critical bu
Lat. Am. j. solids struct.. Publicado em: 28/10/2019
-
8. Influence of Directional Solidification on the Mechanical Properties of Cu-Al-Be-Nb-Ni Alloy
Copper-based polycrystalline shape memory alloys (SMAs) have limitations for many practical applications due to their low superelasticity and low ductility. In order to overcome this situation, in recent years, the production of copper-based SMAs by directional solidification process has attracted the interest of many researches. In this sense, the present w
Mat. Res.. Publicado em: 05/09/2019
-
9. Study of Mechanical Behavior and X-Ray Elastic Constants of Nickel Alloy Weld Overlay
The study of nickel-based alloy 625 clad (weld overlay) by X-ray diffraction (XRD) is difficult and often impossible because of its coarse and anisotropic microstructure. In this work, a sample preparation including machining, grinding, and annealing was proposed to avoid this negative effect in XRD analysis. Electron backscatter diffraction and hardness tes
Mat. Res.. Publicado em: 10/07/2019
-
10. Anisotropic Strength of Granular Material Considering Fabric Evolution
Abstract The effect of fabric anisotropy on strength has not been considered in most strength criterions for granular material. Some criterions can describe the variation of material strength with stress-induced anisotropy, but micro-mechanism and physical meanings are undefined. Some criterions consider the effect of fabric anisotropy, but the evolution of
Lat. Am. j. solids struct.. Publicado em: 08/04/2019
-
11. Stability, Mechanical Properties and Anisotropic Elastic Properties of GaxMgy Compounds
The stability, mechanical properties and anisotropic properties of sound velocities of Ga2Mg5, GaMg2, GaMg, O-Ga2Mg, H-Ga2Mg and Ga5Mg2 are investigated systematically by the first-principles calculation. The cohesive energy and formation enthalpy are obtained and used to estimate the stability of the Ga-Mg binary compounds. GaMg compound is the most stable
Mat. Res.. Publicado em: 18/02/2019
-
12. Microarchitecture and Radiological Flow Pattern of Cocoon-like Nanocellulose Hydrogels
Abstract This work investigates fluid mechanics and structural properties inside bacterial cellulose hydrogels in from of macroscopic anisotropic ellipsoid body cocoon-like 3D scaffolds. The hydrogels were evaluated by injections of iopamidol, a radiopaque medium used in medical radiological procedures. Results showed that hydromechanical behavior of BC hydr
Mat. Res.. Publicado em: 07/01/2019