Anisotropic Material
Mostrando 1-12 de 50 artigos, teses e dissertações.
-
1. Anisotropic Strength of Granular Material Considering Fabric Evolution
Abstract The effect of fabric anisotropy on strength has not been considered in most strength criterions for granular material. Some criterions can describe the variation of material strength with stress-induced anisotropy, but micro-mechanism and physical meanings are undefined. Some criterions consider the effect of fabric anisotropy, but the evolution of
Lat. Am. j. solids struct.. Publicado em: 08/04/2019
-
2. Multiscale Failure Analysis of Cylindrical Composite Pressure Vessel: A Parametric Study
Abstract This paper deals with a multiscale approach to model thick-walled laminate cylinder with internal pressure. Micromechanics defines material homogenization considering two steps: determination of equivalent properties of each lamina from matrix and fiber properties according to the Mori-Tanaka model for elastic properties and to the Bridging model fo
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
3. Estructuras de titanio con gradiente de porosidad – fabricación por el método de partículas espaciadoras y caracterización
ABSTRACT It has proposed the use of porous titanium to reduce the problem of mechanical incompatibility, which occurs between such material used in implants and bone. The pores introduction in titanium decreases its elastic modulus by bringing it closer to that of both cortical and trabecular bones. This paper describes titanium fabrication by powder metallu
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Experimental exploratory study of failure modes in models of wooden rectangular beams of Hymenae spp
ABSTRACT According to the study of mechanical properties, wood is an elastic or elastoplastic material that presents different structural behaviour when tensioned or compressed. From the viewpoint of elasticity, wood is considered anisotropic, or rather it is a material with elastic properties that vary with the direction considered. During tree growth, the
Matéria (Rio J.). Publicado em: 05/03/2018
-
5. Orthotropic Elastic Properties Assessment of Sandwich Laminates
ABSTRACT: Sandwich structures are nowadays widely used due its excellent characteristics of matching light weight with high bend stiffness. However the complex nature of its composition turns the estimation of its mechanical elastic properties challenging. The objective of the present article is to propose an analytical/experimental model to estimate the ort
J. Aerosp. Technol. Manag.. Publicado em: 26/06/2017
-
6. Sigma Phase in Superduplex Stainless Steel: Formation, Kinetics and Microstructural Path
The superduplex stainless steels (SDSS) are widely used in chemical, oil and gas industries, to pipelines and storage material facilities. In welding process or working in temperature elevated, secondary phases may appear in the form of precipitates, as the sigma phase (σ) which is an intermetallic compound. This compound is harmful to the properties of ste
Mat. Res.. Publicado em: 09/01/2017
-
7. Numeric reconstruction of 2D cellular actomyosin network from substrate displacement
Introduction: One of the fundamental structural elements of the cell is the cytoskeleton. Along with myosin, actin microfilaments are responsible for cellular contractions, and their organization may be related to pathological changes in myocardial tissue. Due to the complexity of factors involved, numerical modeling of the cytoskeleton has the potential to
Res. Biomed. Eng.. Publicado em: 27/11/2015
-
8. Size-dependent thermoelasticity
In this paper a consistent theory is developed for size-dependent thermoelasticity in heterogeneous anisotropic solids. This theory shows that the temperature change can create not only thermal strains, but also thermal mean curvatures in the solids. This formulation is based on the consistent size-dependent continuum mechanics in which the couple-stress ten
Lat. Am. j. solids struct.. Publicado em: 2014
-
9. Determination of the rheological properties of thin plate under transient vibration
The article deals with systematic analysis of the transient vibration of rectangular viscoelastic orthotropic thin 2D plate. The analysis is focused on specific deformation models of plate and for specific linear models of rheological properties. The viscoelastic isotropic and anisotropic (orthotropic) materials were investigated. The plate is loaded by gene
Lat. Am. j. solids struct.. Publicado em: 2013-01
-
10. ANISOTROPIC DIELECTRIC CORRUGATED CYLINDRICAL GUIDE / GUIA CILÍNDRICO CORRUGADO COM DIELÉTRICO ANISOTRÓPICO
Esta tese apresenta uma análise de uma estrutura de corneta cônica corrugada com dielétrico anisotrópico, com eixo óptico na direção axial da corneta. Esta configuração de corneta pode ser conseguida utilizando-se a estrutura de uma corneta corrugada com a adição de um cone dielétrico anisotrópico uniaxial. A anisotropia pode ser conseguida arti
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/02/2012
-
11. Aplicação da técnica de elipsometria de emissão para caracterização de materiais luminescentes
In this work we demonstrated the potential of the emission ellipsometry in the scope of the Stokes theory for electromagnetic field to the photophysics study of luminescent materials, in addition we introduce a new methodology using an achromatic quarter-wave plate. Moreover, the use of linearly polarized light allowed "selectively" the study of various phot
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 07/02/2012
-
12. Numerical simulation of anisotropic polymeric foams
This paper shows in detail the modelling of anisotropic polymeric foam under compression and tension loadings, including discussions on isotropic material models and the entire procedure to calibrate the parameters involved. First, specimens of poly(vinyl chloride) (PVC) foam were investigated through experimental analyses in order to understand the mechanic
Lat. Am. j. solids struct.. Publicado em: 2012-04