Area Interfacial
Mostrando 1-12 de 69 artigos, teses e dissertações.
-
1. Microstructure and Fracture of 50Mo-50Re Vacuum Brazed with Fe-Si-B Filler Metal
Microstructural evolution, interfacial reaction and fracture during vacuum brazing of 50Mo-50Re alloys using amorphous alloy Fe-5.6Si-2.6B(wt%) were investigated. A binary intermetallic compound, σ(Mo2Re3) formed as parallel contiguous layers in the diffusion zone. In addition, Fe from the braze alloy, in combination with dissolved Mo from the substrate, fo
Mat. Res.. Publicado em: 30/09/2019
-
2. Controlling sintering and grain growth of nanoceramics
Resumo Sinterização e crescimento de grão são processos fundamentais que afetam a evolução microestrutural das cerâmicas. Os modelos fenomenológicos que descrevem esses processos, conforme encontrados nos livros didáticos, são simplificações do conjunto altamente dinâmico de parâmetros do sistema, o que leva à previsibilidade limitada e à nec
Cerâmica. Publicado em: 2019-01
-
3. Numerical analysis of the liquid ejection due to the gaseous jet impact through computational fluid dynamics
Abstract Metal droplets generated by an impinging jet, play an important role in metal refining processes, mainly in oxygen steelmaking, where the droplets are ejected into the slag phase. Since the available interfacial area of droplets is very high in this process, the generated droplets enhance the rates of heat transfer and chemical reactions. Therefore,
REM, Int. Eng. J.. Publicado em: 2018-03
-
4. Polyester Pinning Effect on Flexural and Vibrational Characteristics of Foam Filled Honeycomb Sandwich Panels
Abstract Polyester pins are incorporated in polyurethane foam filled honeycomb core sandwich panel to increase the interfacial strength between the faces and core in order to improve the performance of sandwich structures. Foam filled Honeycomb Sandwich panel (FHS) and Pin incorporated Foam filled Honeycomb sandwich panels (PFHS) were developed. The develope
Lat. Am. j. solids struct.. Publicado em: 2017-08
-
5. Enhanced bioactive properties of BiodentineTM modified with bioactive glass nanoparticles
Abstract Objective To prepare nanocomposite cements based on the incorporation of bioactive glass nanoparticles (nBGs) into BiodentineTM (BD, Septodent, Saint-Maur-des-Fosses Cedex, France) and to assess their bioactive properties. Material and Methods nBGs were synthesised by the sol-gel method. BD nanocomposites (nBG/BD) were prepared with 1 and 2% nBG
J. Appl. Oral Sci.. Publicado em: 2017-04
-
6. Sigma Phase in Superduplex Stainless Steel: Formation, Kinetics and Microstructural Path
The superduplex stainless steels (SDSS) are widely used in chemical, oil and gas industries, to pipelines and storage material facilities. In welding process or working in temperature elevated, secondary phases may appear in the form of precipitates, as the sigma phase (σ) which is an intermetallic compound. This compound is harmful to the properties of ste
Mat. Res.. Publicado em: 09/01/2017
-
7. NUMERICAL PREDICTION OF BUBBLE SIZE AND INTERFACIAL AREA CONCENTRATION IN THE LIQUID BATH OF AN ENTRAINED-FLOW COAL GASIFIER
Abstract A CFD-ABND coupling model was used to study the flow characteristic of gas-liquid two-phase flow in the process of gas passing through the liquid bath of a water-coal-slurry entrained-flow gasifier. In this model, an average bubble number density (ABND) approach was employed and merged with the two-fluid model. A two-phase version of the RNG k-ε tu
Braz. J. Chem. Eng.. Publicado em: 2016-03
-
8. Electrified Water: Liquid, Vapor and Aerosol
Many reports associate electrostatic charge in dielectrics with water, either bulk, finely dispersed in aerosol or as atmospheric vapor. Two widespread but currently controversial assumptions relevant to this topic are the prevalence of electroneutrality and the passive role of water in electrical phenomena, dissipating charge due to its significant electric
J. Braz. Chem. Soc.. Publicado em: 2016-02
-
9. Numerical study of confinement in short concrete filled steel tube columns
This study presents a numerical investigation into the behaviour of short concrete filled steel tubular (CFST) columns. Three Dimensional Nonlinear finite element analysis of the compression process is performed using commercial software ABAQUS v6.9 (2009). Steel tubes of different geometries and in-filled with different grades of concrete are chosen for mod
Lat. Am. j. solids struct.. Publicado em: 2014-12
-
10. Hydrodynamic and absorption studies of carbon dioxide absorption in aqueous amide solutions using a bubble column contactor
The present work analyses the carbon dioxide absorption process in aqueous n-alkylpyrrolidones solutions, from the point of view of hydrodynamic studies as well as mass transfer, using a bubble column contactor. An analysis of the influence of solute concentration and gas flow-rate is complemented by the study of the effect caused by the alkyl group on the h
Braz. J. Chem. Eng.. Publicado em: 2013-12
-
11. Specific ion effects on the interfacial tension of water/hydrocarbon systems
Specific ion effects - also known as Hofmeister effects - are ubiquitous in several areas of chemistry, chemical engineering and biology. The interfacial tension corresponds to the energy per unit of area at the interface. Thus, the presence of different salts in different concentrations changes the interfacial tension of a system containing an aqueous phase
Braz. J. Chem. Eng.. Publicado em: 2013-03
-
12. Influência da geometria da nanocarga na estruturação, orientação e propriedades de filmes tubulares de nanocompósitos de PA6 / Influence of the nanoparticles shape on the structure, orientation and properties of pa6 nanocomposites blown films
The structure and morphology of polymers and consequently their properties are dependent on the processing conditions. During the blown film process, high shear and elongational flows can induce a preferred orientation of the polymer chains; controlling the process conditions, it is possible to obtain films with anisotropic properties. Polymeric nanocomposit
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/06/2012