A New Route to Synthesize MnSe Thin Films by Chemical Bath Deposition Method
AUTOR(ES)
Kariper, İshak Afsin
FONTE
Mat. Res.
DATA DE PUBLICAÇÃO
22/01/2018
RESUMO
Manganese selenide (MnSe) crystalline thin film was produced with chemical bath deposition on substrates (commercial glass). Transmittance, absorption, optical band gap and refractive index were investigated by UV/VIS spectrum. The hexagonal form was observed in the structural properties in XRD. The structural and optical properties of the MnSe thin films were analyzed at different pHs. SEM and EDX analysis were used for the surface analysis in the films. The films had the best crystalline at pH: 9. At pHs of 11 and 10 the MnSeO4 structure was observed. The films with the lowest film thickness were found in baths prepared with pH: 11. The highest refractive index was observed in films produced with a pH of 10 at a film density of 1.96. The grain size of MnSe thin films has a higher value at pH: 9.
Documentos Relacionados
- A new route for preparing CdS thin films by chemical bath deposition using EDTA as ligand
- Producing BiI/BiOI Thin Films via Chemical Bath Deposition
- Investigations on the Synthesis, Optical and Electrical Properties of TiO2 Thin Films by Chemical Bath Deposition (CBD) method
- Optical and Electrical Properties of Chemical Bath Deposited Cobalt Sulphide Thin Films
- Comprehensive Study of Growth Mechanism and Properties of Low Zn Content Cd1-xZnxS Thin Films by Chemical Bath