A Numerical Simulation of a Ni-based Bulk Metallic Glass During Compressive Deformation and Fracture

AUTOR(ES)

Weizhong, Liang, Zhiliang, Ning, Ailian, Liu, Yongliang, An

FONTE

Mat. Res.

DATA DE PUBLICAÇÃO

23/10/2015

RESUMO

On the basis of compression tests, uni-axial compression deformation and fracture behaviors of NiTiZrAlCuSi bulk metallic glass samples with different dimensions have been studied by numerical simulation approaches. Finite element models for compression simulation have been developed using ABAQUS software. Shear damage models were employed to reproduce the compression deformation and fracture process of the Ni-based amorphous alloys. Mises stress distribution and equivalent plastic strain obtained numerically during compression were analyzed. The simulation results were consistent with those of the compression experiment tests. The smaller of the samples exhibited larger plasticity and higher fracture strength when compared with the bigger one.

Documentos Relacionados

• Numerical Simulation of Zr-based Bulk Metallic Glass During Continuous Casting Solidification Process
• Crystallization Behavior and Mechanical Properties of Cu-based Bulk Metallic Glass Composites
• Thermal Stability and the Matrix Induced Brittleness in a Ti-based Bulk Metallic Glass Composite
• Influence of Small Content Elements Additions on the Glass Forming Ability of Zr-based Bulk Metallic Glasses Alloys
• Glass Forming Ability and Mechanical Properties of Zr57.52Co21.24Al9.24Ag12 bulk metallic glass