Analysis of the relative rib area of reinforcing bars pull out tests

AUTOR(ES)

Barbosa, Maria Teresa Gomes, Sánchez Filho, Emil de Souza, Oliveira, Thais Mayra de, Santos, White José dos

FONTE

Materials Research

DATA DE PUBLICAÇÃO

2008-12

RESUMO

The good performance of reinforced concrete structures is ensured by the transfer of stress linking a reinforcing bar and the surrounding concrete. The bond steel-concrete is a very complex phenomenon. This paper presents the experimental results of a program with specimens used in the pull out test with concrete strength of 20, 40, 60, 80 and 100 MPa and four different steel diameters: 12.5, 16.0, 20.0 and 25.0 mm. The test results indicated that the bond stress varied with the bars rib face angle, rib spacing, and rib height. The trends of the results were independent of the concrete strength with the test results, and design recommendations made as regards optimum rib geometries of deformed bars with high bond-slip characteristics.

Documentos Relacionados

• Ensaios de arrancamento e cisalhamento em descontinuidades simuladas reforçadas com barras de aço
• Experimental Investigation of Steel-Concrete Bond for Thin Reinforcing Bars
• Implementação de ensaios de arrancamento cíclico de geossintéticos
• Avaliação dos ensaios de microtração, push-out e pull-out: resistência de união entre pino de fibra e dentina radicular, análise de elementos finitos e microscopia confocal
• Fatores que influenciam na resistência de união - ensaios push out e pull out - de pinos intra-radiculares. Estudo in vitro