Analytical method for determining the saturation point of superplasticizers in cement pastes using the Marsh cone
AUTOR(ES)
Silva, O. F. da
FONTE
Cerâmica
DATA DE PUBLICAÇÃO
06/06/2019
RESUMO
Resumo A dosagem ótima dos aditivos superplastificantes (SP) é determinada pelo ponto de saturação do SP (PSP), obtido na pasta de cimento pela utilização do cone de Marsh. A obtenção do PSP é importante, pois define a quantidade de SP que deve ser utilizada em dosagens de concretos, quando são necessárias a redução da demanda de água e a melhoria da trabalhabilidade. O PSP é determinado por métodos que usam os ângulos definidos pela inclinação da curva de fluxo, que são obtidos através de recursos geométricos e visuais. No entanto, dependendo da forma da curva, esses métodos podem fornecer resultados imprecisos. Por este motivo, este estudo analisou a utilização dos métodos geométricos existentes e propôs um novo método analítico de determinação do PSP. Ressalta-se que o método analítico proposto (MAP) foi desenvolvido por implementação numérica para obter a função representativa do fluxo das pastas. O SPS é determinado a partir da solução da equação diferencial do fenômeno, e pode ser utilizado ligado ao ambiente computacional no cálculo da composição do concreto. O MAP foi aplicado e avaliado em diferentes curvas de fluxo obtidas por diversos autores.Abstract The optimum dosage of superplasticizer (SP) additives is determined by the saturation point of SP (SPS), obtained on cement paste by the utilization of the Marsh cone. Obtaining the SPS is important because it defines the amount of SP that should be used in concrete dosages when it is necessary the reduction of water demand and the improvement of the workability. The SPS is determined by methods that use the angles defined by the slope of the flow curve, which are obtained through geometric and visual resources. However, depending on the curve shape, these methods can provide inaccurate results. For this reason, this study analyzed the utilization of the existent geometric methods and proposed a new analytic method of SPS determination. It is noteworthy that the proposed analytical method (PAM) was developed by a numerical implementation to obtain the representative function of paste flow. The SPS is determined from the solution of the phenomenon differential equation and can be used linked to a computational environment in concrete composition calculation. PAM was applied and evaluated in different flow curves obtained by several authors.
Documentos Relacionados
- Development of a simple analytical method for determining trihalomethanes in beer using a headspace solid-phase microextraction technique
- Analytical method for determining at equilibrium the envelope and emittance of initially mismatched beams
- Method for determining the photocatalytic potential of portland cement mortar containing TiO2 for decomposing the pollutant nitrogen monoxide
- Microstructure and hardness of cement pastes with mineral admixture
- Method for determination of root curvature radius using cone-beam computed tomography images