Avaliação da corrosividade do etanol combustível utilizando arranjo de microeletrodos / Corrosion evaluation in ethanol fuel using microelectrodes array
AUTOR(ES)
Camila Molena de Assis
FONTE
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia
DATA DE PUBLICAÇÃO
02/03/2012
RESUMO
This work presents an investigation on the corrosion of cooper metal, using a microelectrode array building using lithography technique. The influence of microelectrode array area was investigated on the ohmic drop and resistance of ethanol. The results were then compared with existing theoretical methodologies and good agreements were found. It was concluded that resistance of ethanol increases with decreases single microelectrodes diameter and decreases with decreases array microelectrodes diameter. The ohmic drop decreases with diameter decreases and the ohmic drop compensation had the smallest effect on microelectrodes with smaller area.
ASSUNTO(S)
corrosão microeletrodos etanol combustível corrosion microelectrodes ethanol fuel
ACESSO AO ARTIGO
http://libdigi.unicamp.br/document/?code=000847480Documentos Relacionados
- Microcélulas a combustível a etanol direto.
- Modelo para avaliação de sustentabilidade da agroindústria de etanol
- O etanol como fonte de hidrogenio para celulas a combustivel na geração distribuida de energia eletrica
- EVALUATION OF DIESEL CYCLE ENGINE OPERATING IN THE DUAL FUEL MODE: DIESEL
- Materiais nanoestruturados baseados em Pt e Sn para células a combustível de etanol direto