Castor oil and commercial thermoplastic polyurethane membranes modified with polyaniline: a comparative study
AUTOR(ES)
Almeida Júnior, José Humberto Santos, Bertuol, Daniel Assumpção, Meneguzzi, Alvaro, Ferreira, Carlos Arthur, Amado, Franco Dani Rico
FONTE
Mat. Res.
DATA DE PUBLICAÇÃO
10/05/2013
RESUMO
The study of conducting polymeric membranes is decisive in some areas, as in fuel cells and electrodialysis. This work aims the study of membranes using conventional and conductive polymers blends. Two types of polyurethane were used as conventional polymers, commercial thermoplastic polyurethane and polyurethane synthesized from castor oil and 4-4-dicyclohexylmethane isocyanate. Two kinds of conducting polymers were used, polyaniline doped with organic acid and a self doped polyaniline. The polymers and the membranes were characterized by electrical conductivity, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA) and scanning electron microscopy (SEM). The synthesis of the membranes produced was proper, featuring a complete reaction, analyzed by FTIR. The membranes also showed good mechanical properties and thermal stability (≈ 220 °C). Among the membranes studied, the polyaniline doped with p-toluenesulphonic acid obtained higher thermal and viscoelastic properties. Thus they can be used in separation techniques using membranes.
Documentos Relacionados
- Experimental study on waterproofing MDF with castor oil-based vegetal polyurethane
- Biodegradation of polyurethane derived from castor oil
- Sugarcane bagasse and castor oil polyurethane adhesive-based particulate composite
- Flexural behavior of Sisal/Castor oil-Based Polyurethane and Sisal/Phenolic Composites
- Bone regeneration after demineralized bone matrix and castor oil (Ricinus communis) polyurethane implantation