Construção e caracterização de fotodetetores metal-semicondutor-metal (MSM). / Construction and characterization of metal-semiconductor-metal (MSM) photodetectors.

AUTOR(ES)
DATA DE PUBLICAÇÃO

2006

RESUMO

The goal of this work was the fabrication of Metal-Semiconductor-Metal (MSM) photodetectors with the following characteristics: dark current of about 1 nA, responsivity of about 0.1 A/W and dark/photocurrent ratio of at least 10. These values ensure that the photodetectors have enough sensitivity to be used in integrated optic sensors. All materials used in the fabrication of the MSM are compatible with conventional microelectronic manufacture process, so that the photodetectors can be more easily integrated with other solid-state devices. The semiconductor used in the photodetectors was silicon, in single crystal and polycrystalline form. As material of electrodes, aluminum, titanium or nickel had been used. The basic fabrication process consists of only three steps: metal film deposition, photolithography and etching, which confirm the simplicity of the fabrication of this device. Building MSMs with different geometries and making combinations with the materials cited above, gave the possibility to verify the influence that crystalline structure of the semiconductor, doping type of the semiconductor, geometry and electrode material have on the behavior of the photodetectors. The wavelength of 632.8 nm was used in the characterization of the devices, due to its availability and the development of optic waveguides using this wavelength in previous works of our research group. The best results were obtained with the samples fabricated using single crystal Si p-type with titanium electrodes. The sample annealed at 250°C had dark current value of 4.8 nA and, the reference sample had responsivity of 0.28 A/W.

ASSUNTO(S)

fabrication (microelectronic) optic devices semicondutores semiconductor fabricação (microeletrônica) dispositivos ópticos

ACESSO AO ARTIGO

Documentos Relacionados