Control and optimization of baths for electrodeposition of Co-Mo-B amorphous alloys

AUTOR(ES)

Prasad, S., Marinho, F.A., Santana, F.S.M.

FONTE

Brazilian Journal of Chemical Engineering

DATA DE PUBLICAÇÃO

2000-12

RESUMO

Optimization and control of an electrodeposition process for depositing boron-containing amorphous metallic layer of cobalt-molybdenum alloy onto a cathode from an electrolytic bath having cobalt sulfate, sodium molybdate, boron phosphate, sodium citrate, 1-dodecylsulfate-Na, ammonium sulfate and ammonia or sulfuric acid for pH adjustments has been studied. Detailed studies on bath composition, pH, temperature, mechanical agitation and cathode current density have led to optimum conditions for obtaining satisfactory alloy deposits. These alloys were found to have interesting properties such as high hardness, corrosion resistance, wear resistance and also sufficient ductility. A voltammetric method for automatic monitoring and control of the process has been proposed.

Documentos Relacionados

• Optimization of operational parameters and bath control for electrodeposion of Ni-Mo-B amorphous alloys
• Electrodeposition of Co-rich Cu-Co Alloys from Sodium Tartrate Baths Using Direct (DC) and Single Pulsed Current (SPC)
• Electrodeposition of Ni-Mo and Fe-Mo alloys from sulfate-citrate acid solutions
• Corrosion resistance and glass forming ability of Fe47Co7Cr15M9Si5B15Y2 (M=Mo, Nb) amorphous alloys
• Facile One-Step Electrodeposition Fabrication of Amorphous MoS2 Catalysts in Titanium for Hydrogen Evolution Reaction