Control of integrating process with dead time using auto-tuning approach
AUTOR(ES)
Saravanakumar, G., Wahidabanu, R. S. D.
FONTE
Brazilian Journal of Chemical Engineering
DATA DE PUBLICAÇÃO
2009-03
RESUMO
A modification of Smith predictor for controlling higher order processes with integral action and long dead-time is proposed in this paper. The controller used in this Smith predictor is an Integral-Proportional Derivative controller, where the Integrator is in the forward path and the Proportional and Derivative control are in the feedback, acting on the feedback signal. The main objective of this paper is to design a dead time compensator, which has minimum tuning parameters, simple controller tuning, and robust performance of tuning formulae, and to obtain a critically damped system that is as fast as possible in its set point and load disturbance rejection performance. The controller in this paper is tuned by an adaptive method. This paper also presents a survey of various dead time compensators and their performance analysis.
Documentos Relacionados
- Estudo, proposta e avaliação de novas metodologias de sintonia automática de controladores PID baseadas no ensaio do relé realimentado
- Controle preditivo de horizonte infinito para sistemas integradores e com tempo morto.
- INTEGRATING REAL TIME OPTIMIZATION AND MODEL PREDICTIVE CONTROL OF A CRUDE DISTILLATION UNIT
- TUNING OF MODEL PREDICTIVE CONTROL WITH MULTI-OBJECTIVE OPTIMIZATION
- Optimizing the control system of cement milling: process modeling and controller tuning based on loop shaping procedures and process simulations