Creep properties of 1.25Cr-1Mo-0.25V steels for turbine casings
AUTOR(ES)
Hernández, Sergio G., Conejo, Alberto N.
FONTE
Rem: Revista Escola de Minas
DATA DE PUBLICAÇÃO
2005-06
RESUMO
A heat resistant steel, 1.25Cr-1Mo-0.25V, produced by a casting process and used in the manufacture of turbine casings, has been heat treated with a combination of thermal cycles that involve annealing, quenching and tempering in order to obtain high mechanical properties - in particular, rupture-strength at high temperatures. The Larson-Miller Parameter has been used to predict results from short-time tests (50 hours) with those obtained at longer times (3000-20000 hours). The predictions resulted in higher rupture-times. However, the current methodology can provide a rapid estimation of creep-behavior at longer times from short-time tests in order to take corrective actions during the manufacturing process.
Documentos Relacionados
- Microstructure Evolution and Creep Properties of 2.25Cr-1Mo Ferrite-Pearlite and Ferrite-bainite Steels After Exposure to Elevated Temperatures
- Naphthenic corrosion resistance, mechanical properties and microstructure evolution of experimental Cr-Mo steels with high Mo content
- Comparison of the corrosion resistance of DIN W. Nr. 1.4970 (15%Cr-15%Ni-1.2%Mo-Ti) and ASTM F-138 (17%Cr-13%Ni-2.5%Mo) austenitic stainless steels for biomedical applications
- Hot tensile and creep rupture data extrapolation on 2.25Cr-1Mo steel using the CDM Penny-Kachanov methodology
- Constant load creep data in air and vacuum on 2.25Cr-1Mo steel from 600 °C to 700 °C