Dry reforming of methane at moderate temperatures over modified Co-Al Co-precipitated catalysts
AUTOR(ES)
Souza, Guilherme de, Marcilio, Nilson Romeu, Perez-Lopez, Oscar William
FONTE
Mat. Res.
DATA DE PUBLICAÇÃO
28/07/2014
RESUMO
M-Co-Al (M = Ca, La, Li or Mg) materials were synthesised by co-precipitation and investigated for dry reforming of methane. Thermogravimetry, temperature-programmed oxidation, reduction and CO2 desorption, specific area and X-ray diffraction were utilised for characterisation. Activity tests were conducted at atmospheric pressure, temperatures between 400-550ºC , CH4/CO2 molar ratio of 1 and GHSV of 6000 NmL CH4·g-1·h-1. The partial substitution of Co by a third element increased the area and changed the acid/base properties, reducibility and crystallinity of the oxides. These modifications resulted in higher activity for dry reforming of methane, mainly related to the decrease in the acidity of the promoted materials and, consequently, lower carbon formation. The Li-modified sample presented the lowest coke deposition due to the increase in stronger basic sites. The Mg-promoted catalyst exhibited the best activity performance. This depicts the enhancement in the reducibility and acid/base properties found in the MgCoAl sample.
Documentos Relacionados
- Decomposição do metano sobre catalisadores Co-Al modificados com cobre
- Detailed crystallization study of co-precipitated Y1.47Gd1.53Fe5O12 and relevant magnetic properties
- CHARACTERIZATION AND BEHAVIOUR OF PT CATALYSTS SUPPORTED ON BASIC MATERIALS IN DRY REFORMING OF METHANE
- OXIDATIVE-REFORMING OF METHANE AND PARTIAL OXIDATION OF METHANE REACTIONS OVER NiO/PrO2/ZrO2 CATALYSTS: EFFECT OF NICKEL CONTENT
- METHANE DRY REFORMING OVER Ni SUPPORTED ON PINE SAWDUST ACTIVATED CARBON: EFFECTS OF SUPPORT SURFACE PROPERTIES AND METAL LOADING