Efecto del procedimiento de soldadura por FSW en la evolución temporal de las propiedades en uniones de AA 7075-T651
AUTOR(ES)
Tufaro, Leonardo N., Svoboda, Hernán G.
FONTE
Soldag. insp.
DATA DE PUBLICAÇÃO
2014-12
RESUMO
It was studied the effect of the welding procedure on the temporal evolution of the mechanical properties in AA 7075-T651 friction stir welded joints. To vary the heat input samples with different parameters (rotation and welding speed) were welded. Thermal cycles were acquired by means of thermocouples instrumented on the samples, obtaining the heat input for each case. The welded joints were macrostructural characterized using optical microscopy. Vickers microhardness profiles and tensile tests were measured for different times after welding (between 1and 900 days).The minimum hardness (HVmin) value was located in the heat affected zone (HAZ). That HVmin decreased with heat input and was increased with the time elapsed after welding showing a logarithmic relationship, for the different welding conditions analyzed. This HVmin increasing was higher for the sample welded with the lower heat input. Tensile strength of welded joints increased with the time after welding, according to a logarithmic relation too, reaching an joint efficiency of 80%.
Documentos Relacionados
- Tensiones residuales en uniones soldadas por FSW en aluminio 7075-T651
- Efecto del procedimiento de soldadura sobre las propiedades de uniones soldadas de aceros microaleados para cañería
- Comportamiento frente a la corrosión de uniones soldadas por fricción agitación de AA7075-T651: Evaluación galvánica
- Estudio de propiedades mecánicas locales de uniones soldadas por fricción agitación (FSW) en AA6061-T6 mediante Small Punch Test (SPT)
- Compactación del suelo durante la cosecha forestal: evolución de las propiedades físicas