Effect of interactive ternary mixtures on dispersion characteristics of ipratropium bromide in dry powder inhaler formulations

AUTOR(ES)
FONTE

Springer-Verlag

RESUMO

The purpose of this investigation was to evaluate the effect of mixing order and the influence of adding fines on in vitro performance of ipratropium bromide (ITB) dry powder inhaler formulations. Coarse lactose (CL) in varying mass ratio with or without addition of micronized lactose (ML) and ITB in different mixing sequences was used to formulate ternary mixtures. A binary mixture composed of CL and ITP served as control. The in vitro deposition of ITB from these formulations was measured using an Andersen cascade impactor (aerosolization at 39 L/min) employing a HandiHaler as the delivery device. It was observed that mixing order has a significant effect (P<.05) on in vitro deposition of ITB. Formulations with preblending of CL and ITB produced similar deposition profiles as the control, regardless of the added ML. In contrast, formulations without preblending resulted in significantly higher fine particle dose (FPD) as compared with the control. In addition, an increased quantity of ML generally resulted in an increase in drug deposition. The results show that the effect of ML on dispersion of ITB is highly dependent upon the mixing order. The evaluation of atomic force measurement (AFM) to forecast drug detachment and predict the aerodynamic characteristics resulted in similar attraction forces for the different pairs lactose/lactose (42.66±25.01 nN) and lactose/ITB (46.77±17.04 nN).

ACESSO AO ARTIGO

Documentos Relacionados