Effect of methodology, dilution, and exposure time on the tuberculocidal activity of glutaraldehyde-based disinfectants.
AUTOR(ES)
Cole, E C
RESUMO
The Association of Official Analytical Chemists (AOAC) test for assessing the tuberculocidal activity of disinfectants has been shown to be variable. A modified AOAC test, which substituted Middlebrook 7H9 broth as the primary subculture medium and used neutralization by dilution, was compared with the standard AOAC method to assess the mycobactericidal activity of three glutaraldehyde-based disinfectants at 20 degrees C and various exposure times. These changes had a marked effect on results, with the modified AOAC test providing more positive penicylinders per 10 replicates in 12 of the 13 comparisons that provided positive results. These differences were observed with both Mycobacterium bovis (ATCC 35743) and a clinical isolate of Mycobacterium tuberculosis. The effects of various exposure times to and dilutions of the glutaraldehyde-based disinfectants were also examined. The minimum exposure time needed to inactivate reliably M. bovis or M. tuberculosis with 2% glutaraldehyde was 20 min at 20 degrees C. Diluting 2% glutaraldehyde caused a significant decline in mycobactericidal activity. Modification of the standard AOAC test to improve its sensitivity in detecting the failure of disinfectants to inactivate mycobacteria is indicated.
ACESSO AO ARTIGO
http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=184515Documentos Relacionados
- Effect of Methodology on the Tuberculocidal Activity of a Glutaraldehyde-Based Disinfectant
- A more accurate method for measurement of tuberculocidal activity of disinfectants.
- Quantitative neutralization assay of fungicidal activity of disinfectants.
- Lung function and chronic respiratory symptoms of pig farmers: focus on exposure to endotoxins and ammonia and use of disinfectants.
- Effect of excess alkali on the tuberculocidal activity of phenates.
