Effects of tertiary MLC configuration on secondary neutron spectra from 18 MV x-ray beams for the Varian 21EX linear accelerator

AUTOR(ES)
FONTE

American Association of Physicists in Medicine

RESUMO

The effect of the jaw configuration and the presence and configuration of the tertiary multileaf collimator (MLC) on the secondary neutron spectra for an 18 MV Varian 21EX linear accelerator (linac) is investigated in detail. The authors report the measured spectra for four collimator (jaw-and-MLC) configurations. These configurations represent the extreme settings of the jaws and MLC and should therefore describe the range of possible fluence and spectra that may be encountered during use of this linac. In addition to measurements, a Monte Carlo model was used to simulate the four collimator configurations and calculate the energy spectra and fluence at the same location as it was measured. The Monte Carlo model was also used to calculate the sources of neutron production in the linac head for each collimator configuration. They found that photoneutron production in the linac treatment head is dominated by the order in which the primary photon beam intercepts the high-Z material. The primary collimator, which has the highest position in the linac head (in a fixed location), is the largest source of secondary neutrons. Thereafter, the collimator configuration plays a role in where the neutrons originate. For instance, if the jaws are closed, they intercept the beam and contribute substantially to the secondary neutron production. Conversely, if the jaws are open, the MLC plays a larger role in neutron production (assuming, of course, that it intercepts the beam). They found that different collimator configurations make up to a factor of 2 difference in the ambient dose equivalent.

ACESSO AO ARTIGO

Documentos Relacionados