Estudio de la resistencia a la tracción y deformación de fundición esferoidal de pequeño espesor
AUTOR(ES)
David, P.H., Massone, J. M., Sikora, J.A.
FONTE
Matéria (Rio de Janeiro)
DATA DE PUBLICAÇÃO
2006-09
RESUMO
The present work analyzes the mechanical properties of plates with thickness ranged between 1.5 to 4mm. Heats with different carbon equivalent (CE) were produced and resin bonded sand molds with vertical and horizontal gating systems were pour. Nodules counting ranged between 900 to 2200 nod/mm2 were obtained. All plates were ferritized prior to machining tensile test samples in order to avoid the influence of the different micro constituents. Elongation values higher than the values stipulate in the ASTM A356 standard were obtained, reaching up to 32% in plates of 4mm thickness, vertical mold. The influence of CE, nodule count and chemical composition on the mechanical properties were established.
Documentos Relacionados
- Estudio del comportamiento de fundición CADI sometida a FCR
- Efectos de la exposición a vacío y aire de películas de SnO2 con distinto espesor
- La evaluacion y la universidad como objeto de estudio
- Determinacion de la bioactividad y la resistencia a la compresion de bloques de Poliapatita
- La pesca comercial y el estudio de la fauna marina en la Argentina, 1890-1930