Evaluation of the performance of a wire-plate electrostatic precipitator
AUTOR(ES)
Nóbrega, S.W., Arnosti Jr, S., Coury, J.R.
FONTE
Brazilian Journal of Chemical Engineering
DATA DE PUBLICAÇÃO
2001-09
RESUMO
This work presents an analysis based on experimental measurement of the influence of gas velocity, applied potential, diameter of the active electrode and distance between two consecutive active electrodes in the performance of a wire-plate electrostatic precipitator. The dimensions of the experimental equipment were as follows: length = 0.5 m, height = 0.3 m, width = 0.3 m, number of ducts = 3, distance between the collection electrodes = 0.1 m and collection area = 0.9 m². The particulate material used in the tests was a phosphatic concentrate with a density of 3.0 x 10³ kg/m³ and a mean particle size of 8.0 mum. The performance of the precipitator was evaluated by measuring its overall collection efficiency, obtained by isokinetic sampling at the entrance and exit of the experimental system. The results were compared to predictions obtained using the classic Deutsch-Anderson equation as well as the one from Zhao et al. (1996). A correction factor is proposed.
Documentos Relacionados
- A study of a wire-plate eletrostatic precipitator operating in the removal of polydispersed particles
- Numerical verification and experimental validation of the FEM model of collecting electrodes in a dry electrostatic precipitator
- Performance and Surface Integrity of Wire Electrical Discharge Machining of Thin Ti6al4v Plate Using Coated and Uncoated Wires
- Multiregional Evaluation of the SimPlate Heterotrophic Plate Count Method Compared to the Standard Plate Count Agar Pour Plate Method in Water
- Performance of an Automated Computerized Plate Scanner