Hardness and stress of amorphous carbon films deposited by glow discharge and ion beam assisting deposition
AUTOR(ES)
Marques, F. C., Lacerda, R. G.
FONTE
Brazilian Journal of Physics
DATA DE PUBLICAÇÃO
2000
RESUMO
The hardness and stress of amorphous carbon films prepared by glow discharge and by ion beam assisting deposition are investigated. Relatively hard and almost stress free amorphous carbon films were deposited by the glow discharge technique. On the other hand, by using the ion beam assisting deposition, hard films were also obtained with a stress of the same order of those found in tetrahedral amorphous carbon films. A structural analysis indicates that all films are composed of a sp²-rich network. These results contradict the currently accepted concept that both stress and hardness are only related to the concentration of sp³ sites. Furthermore, the same results also indicate that the sp² sites may also contribute to the hardness of the films.
Documentos Relacionados
- Study of ion beam sputtering using a glow discharge ion source
- Raman and infrared spectroscopy studies of carbon nitride films prepared on Si (100) substrates by ion beam assisted deposition
- Study of hydrogenated amorphous silicon obtained by glow discharge
- Effects of hot isostatic pressure on titanium nitride films deposited by physical vapor deposition
- Production and characterization of thin films of hydrogenated amorphous silicon obtained by 60hz glow discharge.