Identification of temperature-dependent thermal properties of solid materials

AUTOR(ES)
FONTE

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DATA DE PUBLICAÇÃO

2008-12

RESUMO

This work proposes an experimental technique for the simultaneous estimation of temperature-dependent thermal diffusivity, α, and thermal conductivity, λ, of insulation materials. The thermal model used considers a transient one-dimensional heat transfer problem. The determination of these properties is done by using the principle of the Mixed technique. In this technique two objective functions are defined, one in the frequency domain and the other in the time domain. The objective function in the frequency domain is based on the square difference between experimental and calculated values of the phase angle, while the other objective function is the least square error function of experimental and calculated signals of temperature. The properties α and λ are obtained by using an experimental apparatus that basically consists of a Polyvinyl Chloride (PVC) sample exposed to different temperatures inside an oven. The temperature inside the oven is controlled by a PID temperature controller. The properties α and λ were estimated for 7 (seven) points of average temperature in a range from 20 ºC to 66 ºC. The properties were determined with an additional heating of approximately 4.5 K on the frontal surface. Analyses of sensitivity, sensors location and sample dimensions were also made.

Documentos Relacionados