In-situ raman spectroscopy analysis of re-crystallization annealing of diamond turned silicon crystal

AUTOR(ES)

Jasinevicius, Renato G., Duduch, Jaime Gilberto, Pizani, Paulo Sérgio

FONTE

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DATA DE PUBLICAÇÃO

2007-03

RESUMO

Mechanical material removal during ultraprecision machining of semiconductors crystals normally induces surface damage. In this article, Raman micro-spectroscopy has been used to probe structural alteration as well as residual stresses in the machined surface generated by single point diamond turning. The damage found is characterized by an amorphous phase in the outmost surface layer. In addition, it is reported, for the first time, the results of in-situ re-crystallization annealing of micromachined silicon monitored by micro-Raman spectroscopy. It is also shown that the annealing heat treatment influenced surface roughness: results were Rmax equal to 24.2 nm and 47.3 nm for the non treated and for the annealed surfaces, respectively.

Documentos Relacionados

• Characterization of structural alteration in diamond turned silicon crystal by means of micro raman spectroscopy and transmission electron microscopy
• In-situ PCR Techniques
• PRINS and in-situ PCR Protocols
• Analise numerica dimensional aplicada a combustão in-situ (CIS)
• MAGNETOMETRIA IN-SITU PARA CARACTERIZAÇÃO DE MATERIAIS ELETRODEPOSITADOS