Ku-band Transition with not Metalized Air-Vias between Microstrip Line and Substrate Integrated Waveguide
AUTOR(ES)
Grine, Farouk, Benhabiles, Mohamed Taoufik, Riabi, Mohamed Lahdi
FONTE
J. Microw. Optoelectron. Electromagn. Appl.
DATA DE PUBLICAÇÃO
2017-03
RESUMO
Abstract In this letter, a new transition between microstrip line and substrate integrated waveguide in Ku-band frequency is proposed. This transition composed of one row of not metallized air-vias drilled on both sides of the microstrip line with taper end. The electromagnetic analysis is carried out using a commercial software tool. The presented transition achieves return losses better than 41 dB in Ku-band frequency (12.4–18GHz). In order to validate the simulated results of the proposed concept, a back-to-back transition prototype is designed, fabricated and measured. The measured results demonstrate a minimum return loss of 29.05 dB and maximum insertion loss of 0.685 dB over the entire Ku-band frequency.
Documentos Relacionados
- Design of K-Band Substrate Integrated Waveguide Band-Pass Filter with High Rejection
- Substrate Integrated Waveguide (SIW) Bandpass Filter with Novel Microstrip-CPW-SIW Input Coupling
- New Design Procedure to Determine the Taper Transition for Impedance Matching Between Microstrip Line and SIW Component
- Design and implementation of a Quarter Mode Substrate Integrated Waveguide (QMSIW) cavity filter
- Simulation and Design of a Bandpass Filter Based on Substrate Integrated E-Plane Waveguide