Numerical simulation of fluid flow in CFB risers: A turbulence analysis approach
AUTOR(ES)
Gómez, L. C., Milioli, F. E.
FONTE
Journal of the Brazilian Society of Mechanical Sciences and Engineering
DATA DE PUBLICAÇÃO
2005-06
RESUMO
Turbulence parameters are derived from results of numerical simulation of gas-solid flow in circulating fluidized bed (CFB). A two fluid model with constant viscosity is applied considering an Eulerian continuum approach for both phases. An analysis is performed using a direct numerical integration of balance equations without an explicit use of any turbulence model for both phases. Even though velocity fluctuations of lower scales are eliminated by the considered computational mesh, fluctuations of larger scales are detected and analyzed. The results show that the Reynolds stresses behave according to the expected for a turbulent flow, and a reasonable agreement is found regarding literature experiment. Following the literature, granular temperature is derived from the Reynolds stresses, and qualitatively matches the expected behavior as described by the kinetic theory of granular flow. Finally, it is seen that solid's phase turbulence is captured using the present approach.
Documentos Relacionados
- Some modeling and numerical aspects of the two-fluid simulation of the gas-solids flow in a CFB riser
- A numerical simulation analysis of the effect of the interface drag function on cluster evolution in a CFB riser gas-solid flow
- Numerical analysis of weakly nonlinear wave turbulence
- Numerical simulation of axial flow compressors.
- Numerical simulation of incompressible viscous flow in deforming domains