On the mechanical behavior of an Al 7075 alloy deformed by asymmetrical and conventional rolling

AUTOR(ES)

Vale, Matheus Garcia do

FONTE

Matéria (Rio J.)

DATA DE PUBLICAÇÃO

20/05/2019

RESUMO

ABSTRACT Samples of the Al 7075 naturally and artificially aged were processed by conventional and asymmetrical rolling with 5% of thickness reduction. The rolling processes were evaluated under room temperature and under warm condition (130°C). Mechanical properties were evaluated by uniaxial tensile and Vickers microhardness tests. Microstructure evolutions were followed by optical microscopy analysis. Naturally aged samples showed better yield strengthening under warm processing. Greater ultimate stress and ductility under room temperature processing was also noticed in naturally aged specimens. Artificially aged samples showed better mechanical properties under room temperature, softening under warm processing due to grain recovery process. Microhardness tests showed expected results for both rolling types, especially on asymmetrical rolling with the higher predictions were observed. Micrographs have shown no expressive grain changes or refinement although its flattening was observed. Precipitates were analyzed by EDS/SEM revealing the presence of MgZn2 and CuMgAl along the matrix that provides plastic strengthening.

Documentos Relacionados

• Microstructural Characterization and Evaluation of the Thermomechanical Behavior of an Al 7075-T651 Alloy Deformed by Two Passes of ECAP
• Microstructure and Mechanical Properties of Severely Deformed Mg-4.5Al-1.0Zn Alloy Processed by Asymmetric Rolling on Ingot and Twin Roll Cast Strip
• Mechanical Behavior of Multiwalled Carbon Nanotube Reinforced 7075 Aluminum Alloy Composites Prepared by Mechanical Milling and Hot Extrusion
• Mechanical and Corrosion Behavior of Al7075 (Hybrid) Metal Matrix Composites by Two Step Stir Casting Process
• Effect of heat treatment on some mechanical properties of 7075 aluminium alloy