Optimization and standardization of an enzyme-linked immunosorbent assay protocol for serodiagnosis of Actinobacillus pleuropneumoniae serotype 5.

AUTOR(ES)
RESUMO

An indirect enzyme-linked immunosorbent assay protocol has been optimized with special emphasis given to assay standardization and quality control. Technical aspects such as choice of a microplate, antigen immobilization, buffer composition, optimal screening dilution of sera, and kinetics of the enzymatic reaction were studied and evaluated in order to design a standard protocol offering maximal analytical sensitivity and specificity, as well as to obtain minimal within- and between-plate variability. Among the 27 plates tested, the Nunc 475-094 and 269-620 immunoplates were found to be the best in terms of high positive-to-negative ratio and low variability. No significant differences in antigen immobilization were found by using buffers of various compositions or pHs; however, the presence of magnesium ions (Mg2+; 0.02 M) resulted in a twofold increase in nonspecific background. An optimal screening dilution of sera was established at 1:200. A 1-h incubation period for test serum was found to be optimal. Maximum enzymatic activity for peroxidase was obtained by adjusting both substrate (H2O2) and hydrogen donor [2,2' -azinobis(3-ethylbenz-thiazoline sulfonic acid)] concentrations to 4 and 1 mM, respectively. To control between-plate variability, a timing protocol was adopted. Within-plate variability was also controlled by using a sample placement configuration pattern. Sliding scales were determined by repeated testing of a cross section of samples to set acceptance limits for both within- and between-plate variability. These limits were used in a quality control program to monitor assay performance. The results obtained suggest that this standardized protocol might be useful in the serodiagnosis of Actinobacillus pleuropneumoniae serotype 5.

ACESSO AO ARTIGO

Documentos Relacionados