Rice Hull Ash and Silicic Acid as Adsorbents for Concentration of Bacteriocins†

AUTOR(ES)
FONTE

American Society for Microbiology

RESUMO

A model procedure has been developed for the rapid extraction of five bacteriocins (nisin, pediocin RS2, leucocin BC2, lactocin GI3, and enterocin CS1) from concentrated freeze-dried crude culture supernatants by adsorption onto acid or alkaline rice hull ash (RHA) or silicic acid (SA). Bacteriocins were adsorbed onto RHA or SA by a pH-dependent method and desorbed by decreasing the pH to 2.5 or 3.0 and heating at 90°C for 5 min. The maximum adsorption and optimal pH range for different bacteriocins were as follows: nisin, 97% at pH 7.0; lactocin GI3, 94% at pH 6.0; pediocin RS2, 97% at pH 8.0 to 9.0; leucocin BC2, 88% at pH 9.0; and enterocin CS1, 94% at pH 5.0. The desorption level of lactocin GI3 or enterocin CS1 from the surfaces of both RHA and SA was 94%, while the desorption level of pediocin RS2 and leucocin BC2 was 50% or less. Nisin was desorbed readily from SA (91%) but not from RHA (50% or less). The adsorption of bacteriocins onto RHA and SA increased with the increasing concentration of bacteriocins. Analysis of the desorbed bacteriocins after dialysis and sodium dodecyl sulfate–16% polyacrylamide gel electrophoresis showed a single band that gave a single inhibition zone when overlaid with Lactobacillus plantarum for detection of lactocin GI3, enterocin CS1, and nisin. RHA appears useful for extraction, concentration, and partial purification of the five bacteriocins.

ACESSO AO ARTIGO

Documentos Relacionados