Simulação do processo de estampagem profunda de corpos cilindricos atraves do metodo dos elementos finitos
AUTOR(ES)
Roberto Bortolussi
DATA DE PUBLICAÇÃO
1996
RESUMO
Deep drawing process change the geometry of a metal sheets to complex shapes. The complexity of the geometry and many variables involved make the tool design very difficult. The recent necessity of quicker developments in the manufacturing methods make necessary to review this tool design and to simulation methods have become very important. It was used the Finite Elements Methods with elasto-plastic formulation which is found in the ANSYS 5.0 - A software, for the simulation of cylindrical deep drawing. It was used axisymmetric models. It was verified two different blank diameter were tested to check the variation of strain and force when deep drawing ratio was increased. The influence of the friction coefficient with a diameter of blank has been evaluate. Nodal displacements obtained were used to draw the deformed blank with AUTOCAD R12 and then the thickness variation with radial position was calculated. The simulated results were compared to the experimental results, showing that the methodis reliable
ASSUNTO(S)
simulação (computadores) estampagem (trabalhos em metal) metodo dos elementos finitos
ACESSO AO ARTIGO
http://libdigi.unicamp.br/document/?code=vtls000105942Documentos Relacionados
- Modelagem e simulação numerica do processo de dialise via o metodo dos elementos finitos
- Simulação numérica de escoamentos hipersônicos em não-equilíbrio termo-químico através do método dos elementos finitos
- Simulação do processo de sopro de garrafas de poli(tereftalato de etileno) a partir de pré-formas disponíveis através do método de elementos finitos
- Estudo do processo isotermico de forjamento de precisão, atraves do metodo de elementos finitos
- Identificação de parâmetros materiais através da simulação numérica de um processo de estampagem profunda