Síntesis y caracterización de adhesivos reposicionables de poliuretano dispersos en agua, obtenidos a partir de aceite de castor maleinizado

AUTOR(ES)

Mazo, Paula, López, Lysa, Restrepo, David, Rios, Luis

FONTE

Polímeros

DATA DE PUBLICAÇÃO

11/06/2010

RESUMO

This work focused on the production of aqueous dispersions of polyurethane using the emulsification method by phase inversion. For the synthesis two polyols were employed, viz. a commercial polyester and Maleinizated Castor Oil (MACO), with two diisocyanates: one aromatic, toluene diisocyanate (TDI) and another aliphatic, hexamethylene diisocyanate (HDI), which are not common for this application. Citric acid was used as internal emulsifier which is inexpensive and readily available. The parameters were the amount of citric acid and the mole ratio of isocyanate groups to hydroxyl (NCO/OH), generating a 3² factorial design, with minimization of the sedimented solids. The surface methodology was used to obtain a quadratic polynomial equation by multiple regression analysis. Polyurethanes synthesized were evaluated for their mechanical and adhesive properties (tack, loop tack, hold, peel). These measurements allowed classifying the polyurethanes synthesized as repositionable adhesives, for use in labels.

Documentos Relacionados

• Síntesis y caracterización de espumas flexibles de poliuretano obtenidas a partir de aceite de castor maleinizado
• Adhesivos tipo poliuretano obtenidos a partir de aceite de ricino y almidón químicamente modificados
• Síntesis de espumas rígidas de poliuretano obtenidas a partir de aceite de castor y poliglicerol empleando calentamiento por microondas
• Poliuretanos obtenidos a partir de aceite de higuerilla modificado y poli-isocianatos de lisina: síntesis, propiedades mecánicas y térmicas y degradación in vitro
• Poliuretanos elastoméricos obtenidos a partir de aceite de ricino y almidón de yuca original y modificado con anhídrido propiónico: síntesis, propiedades fisicoquímicas y fisicomecánicas