Ball Bearings
Mostrando 1-12 de 16 artigos, teses e dissertações.
-
1. Study of the AISI 52100 Steel Reuse Through the Powder Metallurgy Route Using High Energy Ball Milling
The AISI 52100 is a tool steel used in industry to produce bearings. After the end of its life cycle, it is remelted or discarded in deposits. The powder metallurgy rises as an alternative to recycle this material without any waste. The steps used to produce the AISI 52100 steel by powder metallurgy included: Machining with speed of 45 rpm, high energy ball
Mat. Res.. Publicado em: 06/11/2017
-
2. Modeling of Combined Impact and Blast Loading on Reinforced Concrete Slabs
Abstract Explosive devices represent a significant threat to military and civilian structures. Specific design procedures have to be followed to account for this and ensure buildings will have the capacity to resist the imposed pressures. Shrapnel can also be produced during explosions and the resulting impacts can weaken the structure, reducing its capacity
Lat. Am. j. solids struct.. Publicado em: 2016-12
-
3. Evaluation of the milling efficiency increase of AISI 52100 steel using niobium carbide addition through high energy ball milling
The AISI 52100 is a tool-type steel and is more often used in industry for the production of bearings. After the end of its life cycle, it is discarded or remelted, but both processes are considered expensive. Thus, the possibility of reusing this material through the powder metallurgy (PM) route is considered advantageous, since it transforms a waste into a
Rem: Rev. Esc. Minas. Publicado em: 2015-09
-
4. Construção e adequação de uma bancada de ensaios para investigações de técnicas não destrutivas de detecção de falhas incipientes em rolamentos
O monitoramento de vibração de máquinas rotativas é de grande interesse da indústria, uma vez que se tem a possibilidade de detectar, com certa antecedência, problemas relacionados à condição de funcionamento do equipamento, possibilitando reparos, ajustes ou consertos e, assim, minimizando custos no caso de falhas graves ou paradas inesperadas. Nes
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
5. Análise dinâmica de rolamentos de esfera / Dynamic analysis of ball bearing
Ball bearings are simple machine elements but largely used in several applications involving high velocities, high temperatures and different loads. The load model is fundamental for the ball bearing s dynamic and for this reason it is necessary to define with accuracy the mechanisms performance using analytical methods. The objective of this thesis is to an
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/08/2010
-
6. Evaluation through the mgnetic inspection of the superficial condition of steel bearing rings DIN 100Cr6 after hard and dry turning. / Avaliação através da inspeção magnética da condição superficial de anéis de rolamento de aço DIN 100Cr6 após torneamento duro a seco.
The present work presents information for the manufacturing of ball bearings components with higher limits of resistance to fatigue, enabling a longer useful life and also the optimization of the production of the pieces, making the usual and final process of grinding unnecessary, which would result in a costs reduction. The motivations of this study are the
Publicado em: 2008
-
7. Estudo sobre a vida útil de rolamentos fixos de uma carreira de esferas. / Study about rolling bearing life of deep groove ball bearings.
O presente trabalho destina-se à discussão sobre o cálculo de vida útil de rolamentos. Mostrando o avanço do processo de cálculo ao longo das décadas até o mais alto grau de desenvolvimento atual. A preocupação do texto é demonstrar de forma simples e objetiva as divergências que existem entre a formulação teórica e a real vida dos rolamentos,
Publicado em: 2007
-
8. Use of Adaptive Filtering for Fault Detection on Ball Bearings / Utilização de filtros adaptativos para detecção de falhas em mancais de rolamentos
The analysis of vibrations constitutes one of the powerful tools destined for predictive maintenance. In this context, and with the objective of contributing to the improvement of the process of detection and diagnosis of ball bearing faults, the use of the technique of adaptive filtering applied to vibration signals is focused in this work, through the mini
Publicado em: 2006
-
9. UtilizaÃÃo de filtros adaptativos para detecÃÃo de falhas em mancais de rolamentos / Use of adaptive filtering for fault detection on ball bearings
A anÃlise de vibraÃÃes constitui uma das poderosas ferramentas destinadas à manutenÃÃo preditiva. Dentro deste contexto, e com o objetivo de contribuir para a melhora do processo de detecÃÃo e diagnÃstico de falhas em mancais de rolamentos, à focado neste trabalho o uso da tÃcnica da filtragem adaptativa aplicada a sinais vibratÃrios, atravÃs da
Publicado em: 2006
-
10. UtilizaÃÃo de filtros adaptativos para detecÃÃo de falhas em mancais de rolamentos / Use of Adaptive Filtering for Fault Detection on Ball Bearings
A anÃlise de vibraÃÃes constitui uma das poderosas ferramentas destinadas à manutenÃÃo preditiva. Dentro deste contexto, e com o objetivo de contribuir para a melhora do processo de detecÃÃo e diagnÃstico de falhas em mancais de rolamentos, à focado neste trabalho o uso da tÃcnica da filtragem adaptativa aplicada a sinais vibratÃrios, atravÃs da
Publicado em: 2006
-
11. DESENVOLVIMENTO DE UM SISTEMA DE PEDAIS DINAMOMÉTRICOS PARA AVALIAÇÃO BIOMECÂNICA NO CICLISMO / DEVELOPMENT OF A DYNAMOMMETER PEDALS SYSTEM FOR CYCLING BIOMECHANICS EVALUATION
The assessment of pedal forces is one of the more sophisticated methods applied on the sports sciences to accomplish cycling performance tests. With information of pedal forces the pedaling technique is evaluated based on the ability of the cyclists to produce and apply forces on the pedals. Several variables concerning the performance can be monitored with
Publicado em: 2006
-
12. Real time monitoring of vibration signals quality using artificial intelligence / Monitoramento em tempo real da qualidade de sinais de vibraÃÃes, utilizando inteligÃncia artificial
This work has the objective to evaluate, in real time, the signals of vibrations acquired for monitoring purpose. An experimental setup compound by an electric motor and five ball bearings, with a load applied in the central bearing. The support bearings are self-aligning ball bearings and the central three are rigid bearings of single career. Was built tech
Publicado em: 2005