Band Structure
Mostrando 1-12 de 639 artigos, teses e dissertações.
-
1. A Compact Dual-Band Self-Diplexing MIMO Patch Antenna for ISM and X-Band Communications
Abstract A compact, dual-band, and self-diplexing MIMO patch antenna with a shared aperture is presented for Industrial scientific medical (ISM) band and X-band communications. The structure consists of two orthogonal feed lines and a rectangular slot in a square patch. The size of the FR4 substrate is 50 × 50 × 1.6 mm3. The designed structure operates at
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Design and Implementation of Microwave Dual-Band Pass Interdigital Filter Using an Analytical Approach
Abstract In this paper, benefiting from frequency transformation between the normalized frequency domain of low-pass prototype frequencies and the real frequency domain of the filter, a purely analytical procedure for dual-band filter design is used. The coupling matrix of the filter is analytically extracted, without the need to perform numerical optimizati
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. A High-Selectivity Bandpass Filter Using Dual-Mode Coupling Resonator
Abstract In this work, a new model of high selectivity dual-mode bandpass filter is presented. The proposed filter consists of a set of coupled lines with a dual-mode adjustable response in its design process. An improvement in selectivity is presented by combining the dual-mode element with a classic band rejection structure, thus making it possible to intr
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
4. A New Miniaturized Low-Profile and Stable Dual-Band FSS with 2.5D Structure for ISM Bands
Abstract Based on 2.5-Dimensional (2.5D) frequency selective surface (FSS) structures, a new miniaturized frequency selective surface structure is proposed in this work to operate as a bandreject filter in the 2.4 GHz (2400 to 2483.5 MHz) and 5 GHz (5150 to 5350 MHz and 5470 to 5725 MHz) ISM (Industrial, Scientific, and Medical) bands. The FSS has the metall
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
5. X-ray line profile analysis and magnetic and optical properties of FexZn0.95-xCr0.05O nanoparticles fabricated by sol-gel route
Abstract FexZn0.95-xCr0.05O nanoparticles have been obtained for the different concentrations of Fe ions by using the sol-gel method. The hexagonal wurtzite structure of all the samples was confirmed by Rietveld refined X-ray diffraction patterns. The addition of Fe ions decreased lattice constants a and c from 3.2487 to 3.2474 Å and 5.2043 to 5.2029 Å, re
Cerâmica. Publicado em: 2022
-
6. Heterogeneous Fenton-like catalytic degradation of phenazine dye over CeO2 (CP-2) nanoscale powder
Abstract A heterogeneous Fenton-like process was explored for oxidation of phenazine dye using ceria polishing material (CP-2). XRD, SEM, FTIR, UV-vis DRS, and pHPZC techniques were applied to characterize the catalyst features. The performance of the heterogeneous Fenton-like process was investigated under various parameters (reaction time, pH, H2O2 concent
Cerâmica. Publicado em: 2022
-
7. Complexes with Furyl-Substituted 3-Hydroxychromone: Synthesis, Characterization and Fluorescence Studies
2-(2-Furyl)-3-hydroxychromone (HL) reacts with MII ions in the formation of quadratic [Cu(L)2] (3), octahedral [M(L)2(OH2)2] (M = Co (1), Ni (2), Zn (4), Mn (5)) and seesaw [M(L)2] (M = Sn (6), Pb (7)) complexes. Recrystallization of complexes 1-3 in presence of pyridine lead to [M(L)2(py)2] (1a-3a) aducts. All compounds were characterized by Fourier transfo
J. Braz. Chem. Soc.. Publicado em: 2021-08
-
8. Wavelength-Selective Near Unity Absorber Based on Fabry-Pérot Nanoresonators
Abstract We proposed and analyzed a planar narrow-band absorber based on a bi-layer metal/dielectric structure. The planar absorber uses the Fabry-Pérot resonance and the inherent loss of the metals, for maximum light absorption in the range of the electromagnetic spectrum visible to the near infrared. The absorption resonance peak can be shifted to other r
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-06
-
9. Omni-Directional Wideband Antenna Array with Solar Cells
Abstract Distributed sensor networks are becoming more and more widespread due to their substantial benefits to our daily lives. These sensors, in most cases, are distributed in nature and even may require mobility. This, in turn, implies omnidirectional collector units to collect the data from various sensors at arbitrary directions. This work summarizes th
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-03
-
10. Wide Band Stop Response Using Interdigital Capacitor/CSRR DGS in Elliptical Microstrip Low-Pass Filter
Abstract In this paper, a compact elliptic-response microstrip low pass filter (LPF) is presented with a wide stop-band using stepped impedance resonators. With high attenuation in the stop-band, the overall size reduction of the proposed filter is achieved using a novel defected ground structure technique using an interdigital capacitor and complementary sp
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-12
-
11. Metamaterial-Fractal-Defected Ground Structure Concepts Combining for Highly Miniaturized Triple-Band Antenna Design
Abstract In this paper, a novel method is proposed to increase the gain and radiation efficiency of a compact patch antenna. By employing a combination of three efficient techniques, we have developed a multi-resonance L-DGS antenna with a high gain of 5 dB and an efficiency of 99.6%. Furthermore, a novel compact Double Negative metamaterial unit cell and it
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-12
-
12. Effect of Push-Pull Ruthenium Complex Adsorption Conformation on the Performance of Dye Sensitized Solar Cells
A new series of tris-(bipyridyl)ruthenium-like complexes based on the 4-tripheylamine-2,2’:6’,2’’-terpyridine (TPA) push-pull ligand was prepared by incorporation of 4-carboxypyridine (cpy), 4,4’-dicarboxi-2,2’-bipyridine (dcbpy) and 4-carboxyterpyridine ligands (ctpy) ligands, in order to adsorb them on TiO2 in different anchoring conformations.
J. Braz. Chem. Soc.. Publicado em: 2020-11