Beta Titanium
Mostrando 1-12 de 28 artigos, teses e dissertações.
-
1. Cell and Bacteria-Baterial Interactions on the Ti10Mo8Nb Alloy After Surface Modification
The purpose of this study is the surface modification of Ti10Mo8Nb experimental alloy by using TiO2 nanostructure growth. Ingots of the Ti10Mo8Nb experimental alloy were produced by fusion from sheets of molybdenum, niobium, and titanium commercially pure in an arc melting furnace under argon atmosphere. The potentiostatic anodic oxidation was performed usin
Mat. Res.. Publicado em: 18/06/2018
-
2. Stability of beta-titanium T-loop springs preactivated by gradual curvature
RESUMO Objetivo: avaliar as mudanças no sistema de forças das molas T pré-ativadas por curvatura, devido ao alívio de tensão estrutural. Métodos: noventa molas em forma de “T”, medindo 6 mm x 10 mm, confeccionadas com fio de beta-titânio TMA® de 0,017” x 0,025” e pré-ativadas por curvatura gradual, foram distribuídas aleatoriamente em n
Dental Press J. Orthod.. Publicado em: 2017-11
-
3. Ultrafine-Grained Ti-13Nb-13Zr Alloy Produced by Severe Plastic Deformation
Biomedical devices currently in use (prostheses, implants) have satisfactory performance in many cases. However, sometimes the body reacts to the device insertion and may lead to its rapid replacement. Some of these disadvantages can be solved by the use of titanium and its alloys, due to their excellent combination of corrosion resistance, wear resistance a
Mat. Res.. Publicado em: 09/10/2017
-
4. Pro-inflammatory Analysis of Macrophages in Contact with Titanium Particles and Porphyromonas gingivalis
Resumo Durante a inserção de implantes dentários partículas de titânio podem ser liberadas na região peri-implantar levando ao processo de osteólise e a associação com a bactéria pode exacerbar ainda mais a reação inflamatória. Entretanto, a associação de uma bactéria altamente invasiva da cavidade oral, Porphyromonas gingivalis (Pg) e partí
Braz. Dent. J.. Publicado em: 2017-08
-
5. Evolución Microestructural en Uniones de la Aleación Ti-6Al-4V Mediante el Proceso de Soldadura de Punto por Fricción-agitación
Abstract Friction stir spot welding (FSSW) is a process of recent development and interest, mainly in titanium alloys, since there are previous studies of aluminum alloys, magnesium, steel and polymers. Titanium alloys have a wide range of applications in the aeronautical industry, mainly in the components of commercial aircrafts as landing gear. Therefore,
Soldag. insp.. Publicado em: 2016-06
-
6. Differences in the force system delivered by different beta-titanium wires in elaborate designs
Resumo Objetivo: avaliar os sistemas de força produzidos por quatro marcas de fios de -Ti, dobrados em formas complexas. Métodos: quarenta molas T-Loop (TLS) dobradas à mão, confeccionadas a partir de fios de -Ti, calibre 0,017" x 0,025", foram aleatoriamente divididas em quatro grupos, de acordo com a marca do fio: TMA (G1), BETA FLEXY (G2), BETA III
Dental Press J. Orthod.. Publicado em: 2015-12
-
7. Mechanical Characterization of Ti–12mo–13nb Alloy for Biomedical Application Hot Swaged and Aged
Beta titanium alloys were developed for biomedical applications due to the combination of its mechanical properties including low elasticity modulus, high strength, fatigue resistance, good ductility and with excellent corrosion resistance. With this perspective a metastable beta titanium alloy Ti-12Mo-13Nb was developed with the replacement of both vanadium
Mat. Res.. Publicado em: 23/10/2015
-
8. Frictional resistance of self-ligating versus conventional brackets in different bracket-archwire-angle combinations
Objective: To compare the influence of archwire material (NiTi, beta-Ti and stainless steel) and brackets design (self-ligating and conventional) on the frictional force resistance. Material and Methods: Two types of brackets (self-ligating brackets - Smartclip, 3M/Unitek - and conventional brackets - Gemini, 3M/Unitek) with three (0, 5, and 10 degrees) s
J. Appl. Oral Sci.. Publicado em: 2014-06
-
9. Matrix consolidation mechanism in 1D-Ti/SiC/C composites produced by continuous binder-powder coating
In this workmatrix consolidation mechanism has been investigated in 1D-Ti/SiC/C composites produced by Continuous Binder-Powder Coating - CBPC. Titanium metal matrix composites reinforced with continuous SiC/C filaments were analysed in different densification conditions. The results show that during processing, densification occurs by several mechanisms inc
Mat. Res.. Publicado em: 28/01/2013
-
10. Microstructural characterization of Ti-6Al-7Nb alloy after severe plastic deformation
The ASTM F1295/Ti-6Al-7Nb alloy present mechanical properties and biocompatibility very attractive for application in medical and dental implants. In this context, processing of these Ti-based alloys by severe plastic deformation (SPD) has been extensively reported recently. However, the mechanical properties of equal channel angular pressed (ECAP) ASTM F129
Mat. Res.. Publicado em: 16/08/2012
-
11. Preparation and study of the titanium oxide thin films doped with Tb3+ and Ce3+ ions
In this study, we investigated the dependence of the thickness and refractive index of thin films on the withdrawal speed. The films were produced by dip-coating on a glass substrate. The hydrolytic (conventional) sol-gel method was used in the preparation of titanium alkoxide, which were obtained by homogenizing tetraethylorthotitanate stabilized by beta-di
Matéria (Rio J.). Publicado em: 2012
-
12. Mechanical evaluation of space closure loops in Orthodontics
This study evaluated the mechanical performance of teardrop-shaped loops and teardrop-shaped loops with helix used in orthodontic space closure. Sixty retraction loops made with 0.019" x 0.025" stainless steel (SS) and beta-titanium (BT) wires were used. They were attached to a testing machine to measure the magnitudes of the sagittal force and the load-defl
Brazilian Oral Research. Publicado em: 21/01/2011