Blast Furnace
Mostrando 1-12 de 79 artigos, teses e dissertações.
-
1. Evaluation of the use of blast furnace slag as an additive in mortars
Abstract Clinker is the raw material used in the manufacture of cement. However, this material is very harmful to the environment, since it is estimated that for every ton of clinker produced, about 1.0 ton of CO2 is released into the atmosphere. For this reason, alternatives were sought for the use of other materials that are less harmful to the environment
REM - International Engineering Journal. Publicado em: 2022
-
2. The importance of education
Abstract The present research is dedicated to analyzing the addition of sawdust biomass, which is a carbonaceous raw material that may be used in coal blends for the production of metallurgical coke, preserving the required quality, with lower cost. The quality of metallurgical coke may be determined by the efficiency of its chemical, physical and thermal fu
REM, Int. Eng. J.. Publicado em: 2021-06
-
3. Quality evaluation of metallurgical coke produced with sawdust and different mixtures of coal
Abstract The present research is dedicated to analyzing the addition of sawdust biomass, which is a carbonaceous raw material that may be used in coal blends for the production of metallurgical coke, preserving the required quality, with lower cost. The quality of metallurgical coke may be determined by the efficiency of its chemical, physical and thermal fu
REM, Int. Eng. J.. Publicado em: 2021-06
-
4. Characterization of sugarcane bagasse ash (SBA) and its evaluation for use in alkali-activated slag mixtures
Abstract This work proposed to incorporate the sugarcane bagasse ash (SBA) with a high content of organic matter (loss on ignition of 35.87%) in alkali-activated mixtures with blast furnace slag. After grinding SBA, replacement ratios of 10%, 20%, and 30% of the ground ash were used for the flowability evaluation. The mixtures containing 20% and 30% showed a
Cerâmica. Publicado em: 2021-03
-
5. Analysis of the chloride diffusion coefficients by different test methods in concrete mixtures containing metakaolin and high-slag blast-furnace cement
ABSTRACT This study aims to evaluate the chloride diffusion coefficient and the service life (SL) of concretes containing metakaolin and high-slag blast-furnace cement (HSBFC). Accelerated methods of chloride ion diffusion and migration (RCPT, RMT, BDT and multiregime test method) were used. To produce the specimens, HSBFC resistant to sulphates (CPIII 40 RS
Matéria (Rio J.). Publicado em: 25/11/2019
-
6. Análise da redução da alcalinidade de compósitos cimento-madeira em função da substituição parcial do cimento Portland por pozolanas
RESUMO O objetivo desta pesquisa foi avaliar a redução da alcalinidade de compósitos cimento-madeira, produzido com cimento Portland e partículas residuais de Pinus spp., em função da substituição gradual do cimento Portland pelas pozolanas sílica ativa (SA) metacaulim (MK), cinza volante (CV), escória de alto-forno (EAF), cinza de casca de arroz (
Matéria (Rio J.). Publicado em: 25/11/2019
-
7. Reduction Behavior of Low Grade Iron Ore at Reducing Conditions Simulating Different Zones of Blast Furnace
Representative technological samples for Baharia iron ore are collected from El-Gedida iron ore mines at the western desert of Egypt. Baharia iron ore was fired at 1000ºC for 3 hours, then the green and fired samples was isothermally reduced by different ratios of H2/CO/CO2/N2 which closely represent the theoretical reduction conditions in different zones o
Mat. Res.. Publicado em: 02/09/2019
-
8. Effect of Curing Temperature, Activator Solution Composition and Particle Size in Brazilian Fly-Ash Based Geopolymer Production
The geopolymer binder is a relatively new class of inorganic binding material of elevated mechanical strength and good chemical properties. This can be produced using clay minerals or byproducts of the industrial processes, such as metakaolin, fly-ash and blast furnace slag. In this work, geopolymers were produced by alkaline activation of a Brazilian fly-as
Mat. Res.. Publicado em: 22/08/2019
-
9. Investigación de diseños de mezcla para producir Ultra High Performance Fiber Reinforced Concrete (UHPFRC) usando ANOVA
ABSTRACT An experimental study is presented to produce Ultra High Performance Fiber Reinforced Concrete (UHPFRC) including industrial waste in the mix, and determine the average compressive strength. The study includes factor arrangements to perform analysis of variance using ANOVA. The controllable factors were: (i) age of the sample; (ii) granulometry of t
Matéria (Rio J.). Publicado em: 10/06/2019
-
10. Alkaline activation of high-calcium ash and iron ore tailings and their recycling potential in building materials
Resumo Materiais álcali ativados são aglomerantes obtidos a partir da ativação alcalina de precursores ricos em alumínio e silício. Os precursores mais comuns utilizados para ativação são as cinzas com baixo teor de cálcio, as escórias de alto forno e o metacaulim. Contudo, a cinza de cavaco de eucalipto (CCE) e o rejeito de minério de ferro (RMF
Ambient. constr.. Publicado em: 10/06/2019
-
11. Concretos com agregados reciclados de resíduos de construção e demolição e adições minerais: uma análise bibliográfica
RESUMO Os impactos ambientais causados pela produção do concreto precisam ser reduzidos para torná-lo um material mais sustentável. O uso de agregados reciclados em substituição aos agregados naturais e das adições minerais em substituição parcial ao cimento são alternativas que podem tornar o concreto um material com menor carga de poluentes asso
Matéria (Rio J.). Publicado em: 10/06/2019
-
12. Cenizas de cascarilla de arroz para la activación alcalina de cementantes binarios (ceniza volante/escoria de alto horno)
ABSTRACT Alkali activated mortars made of class F fly ash and blast furnace slag were cast, in order to study the effect of an alternative source of silica on its properties of fluidity and compressive strength. Rice husk ash and sodium silicate solution, mixed with sodium hydroxide, were used for activation of mortars. The mineralogical and structural infor
Matéria (Rio J.). Publicado em: 20/05/2019