Bridges Systems
Mostrando 1-12 de 42 artigos, teses e dissertações.
-
1. New Metal-Organic Systems with a Functionalized Oxamate-Type Ligand and MnII, FeII, CuII and ZnII
Four new complexes of formula [Fe(H2pcpa)2(H2O)2] (1), {[Mn(Hpcpa)(H2O)3]•1/2H2O}n (2), {[Zn(Hpcpa)(H2O)3]•1/2H2O}n (3) and [Cu2(Hpcpa)2(bipy)2]•8H2O (4) [H3pcpa = N-(4-carboxyphenyl)oxamic acid; bipy = 2,2¢-bipyridine] have been synthesized and their structures determined by X-ray diffraction. The structure of 1 consists of mononuclear iron(II) units
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
2. Analysis of strengthening procedures of reinforced concrete highway bridges: a brazilian case study
Resumo O sistema rodoviário federal brasileiro é constituído em grande parte por pontes construídas antes de 1984. Assim, essas pontes possuem geometria e capacidade de carga incompatíveis com o tráfego atual. Nesse cenário, o objetivo deste estudo foi a avaliação dos procedimentos de alargamento e reforço empregados em uma ponte de concreto armado
Rev. IBRACON Estrut. Mater.. Publicado em: 2019-02
-
3. Effect of setting on the gelling properties of a protein concentrate from giant squid ( Dosidicus gigas) mantle
Abstract Different studies on obtaining protein concentrates or surimi from giant squid ( Dosidicus gigas) have reported that soft gels are obtained in comparison with other fish species. Therefore, the aim of this research was to investigate the effect of the setting (30 and 60 °C, for 0, 30, 60, and 90 min) on the gelling capacity as a possible alternati
Food Sci. Technol. Publicado em: 16/04/2018
-
4. Sensitivity analysis of bridge-track-train system to parameters of railway
Generally, Railway bridges are long structures which have different responses against different loads of train. Applied loads of train on railroad bridges are different in terms of axle loads speed, and annual passed tonnages and they have quite different dynamic behavior in comparison with road bridges. Most researches are basically focused on the quasi-sta
Lat. Am. j. solids struct.. Publicado em: 2014-08
-
5. Lateral vibration analysis of continuous bridges utilizing equal displacement rule
The application of equal displacement rule simplifies the evaluation of lateral displacement demand forSDOF system. For complex multi-degree-of-freedom (MDOF) structures such as continuous bridge systems, however, it requires more investigations. In this paper, a comprehensive parametric study of the ratio of maximum inelastic displacement to maximum elastic
Lat. Am. j. solids struct.. Publicado em: 2014-01
-
6. Modified generalized pushover analysis for estimating longitudinal seismic demands of bridges with elevated pile foundation systems
In longitudinal multi-mode pushover analysis of bridges with elevated pile foundation systems, the inelastic contributions of the second mode cannot be neglected. Generalized pushover analysis cannot be applied directly in this condition. A modified generalized pushover procedure is developed for estimating seismic demands of bridges with elevated pile found
Lat. Am. j. solids struct.. Publicado em: 2014
-
7. Contribuição ao projeto e dimensionamento da superestrutura de pontes rodoviárias em vigas mistas de aço e concreto / Contribution to the project and design of superstructure of bridges composite beams of steel and concrete
Even the metal bridges known for overcoming large spans, designed and implemented by large offices, this paper wishes to present concepts that can be applied in practical design of Steel-Concrete composite bridges of short and medium span, because those are the most common in national highways, and there is also a lack of professionals to design them into st
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 01/03/2012
-
8. Recomendações para o projeto e construção de estruturas com peças roliças de madeira de reflorestamento / Recommendations for design and construction of structures with roundwood from tree farms
The object of this work is to propose the draft for a handbook with recommendations for the design and construction of structures using treated roundwood originating from forest farming in Brazil. Roundwood structures were classified and characterized visually and mechanically. Guidelines were presented for the desing of bridges and barns with structural and
Publicado em: 2010
-
9. Aglomeração de polpa de acerola e proteina isolada de soja em po em leito fluidizado conico e pulsado / Agglomeration of acerola powder and soy protein isolate in a conical pulsed fluid bed
Fluid bed agglomeration is commonly used to improve the instant properties of spray-dried food powders. However, the fluidization of spray-dried particles is characterized by cracks and channels. Vibration or pulsation systems are frequently attached in the fluid bed equipments in order to improve the bed homogeneity and to allow the particles fluidization u
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/03/2009
-
10. Verificação à fadiga de pontes rodoviárias mistas (aço-concreto) / Fatigue analysis of composite highway bridges
Steel and composite highway bridges (steel-concrete) are currently subjected to dynamic actions, for example, variable magnitude due to vehicles traffic on the deck rough pavement. These dynamic actions can generate the fractures nucleation or even their propagation on the structure. The correct consideration of these aspects pointed out to an analysis metho
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 06/03/2009
-
11. Contributions for the brazilian roads network concrete bridge management model. / Contribuições para um modelo de gestão de pontes de concreto aplicado à rede de rodovias brasileiras.
Um sistema de gestão de pontes, como um sistema auxiliar organizacional e de decisão, é constituído de um conjunto de atividades inter-relacionadas, voltadas para o registro e análise de todas as informações que possam contribuir para a redução do custo total das pontes, considerados todos os aspectos nele envolvidos, desde o planejamento, a execuç
Publicado em: 2009
-
12. AVALIAÇÃO DO COMPORTAMENTO ESTRUTURAL DE CONECTORES PERFOBOND E T-PERFOBOND PARA VIGAS MISTAS / ASSESSMENT OF PERFOBOND CONNECTOR BEHAVIOUR FOR COMPOSITE BEAMS
Steel and composite beams have been extensively used in buildings and bridges. The component that assures the shear transfer between the steel profile and the concrete deck, enabling the composite action to develop, is the shear connector. Among the different types of connectors the headed studs, C sections and the Perfobond may be referred. An alternative c
Publicado em: 2009