Bulk Size
Mostrando 1-12 de 227 artigos, teses e dissertações.
-
1. Influence of the addition of niobium oxide on the properties of fused aluminum oxide used in abrasive tools
Abstract Fused alumina is a material used in the manufacturing of abrasive tools, due to its high fusion point, great hardness, and mechanical toughness. In this context, this study addressed the influence of niobium addition on the properties of fused alumina for abrasive applications. A comparison was also made between this oxide and the brown fused alumin
Cerâmica. Publicado em: 2022
-
2. GRAIN STORAGE SYSTEM IN THE STATE OF PARANÁ, BRAZIL, FROM THE PERSPECTIVE OF MULTIVARIATE ANALYSIS
ABSTRACT This study aimed to identify whether there is an association between types of storage and categories of commercialization and use of grains, group the types of storage with the categories of commercialization, and group static and dynamic capacities of the units in the state of Paraná, Brazil. The data were obtained from the Brazilian Registry Syst
Eng. Agríc.. Publicado em: 2020-06
-
3. Morphology, Crystalline Structure and Chemical Composition Of MAO Treated Ti-15Zr-Mo Surfaces Enriched with Bioactive Ions
In this study, MAO treatment was used to enrich, with bioactive Ca, Mg and P atoms, as-casted and heat-treated Ti-15Zr-xMo (x = 0, 5, 10 and 15 wt%) alloys, for potential use as advanced metallic biomaterials. The chemical composition of the surface was evaluated by EDS and XPS measurements. The morphology and microstructure was analyzed by OM and SEM images
Mat. Res.. Publicado em: 09/12/2019
-
4. A UTILIZAÇÃO DE FITOMASSA NA RECUPERAÇÃO DE SOLO DEGRADADO - VILA BURITI / MANAUS (AM)
Resumo Este trabalho teve como objetivo avaliar a recuperação de uma área degradada a partir do uso de fitomassa associada ao uso da Theobroma Grandiflorun Schum (cupuaçu). Soma-se a esse objetivo o monitoramento do crescimento dos indivíduos da espécie estudada; mensuração do acréscimo de nutrientes ao solo; comparação das propriedades físicas d
Mercator (Fortaleza). Publicado em: 09/12/2019
-
5. Water retention capacity in Arenosols and Ferralsols in a semiarid area in the state of Bahia, Brazil
Abstract: One of the most serious problems in areas indicated for irrigation projects in the Brazilian Northeast region is the occurrence of sandy soils, known to have low moisture retention, but occurring in strategic locations in terms of water supply and geographical situation, and which can be used for agricultural purposes. The objective of this study
An. Acad. Bras. Ciênc.. Publicado em: 25/11/2019
-
6. Microstructural Analysis of AgIn5VI8 (VI: S, Se, Te) Ternary Semiconductors by X-Ray Diffraction
This work is a study of the microstructural properties of the polycrystalline ternary compounds AgIn5S8, AgIn5Se8, and AgIn5Te8 by X-ray diffraction technique (XRD). The full-width-half-maximum (FWHM) of the XRD profile is measured as function of the diffraction angle and used to estimate the microstructural parameters. In general, a microstructural characte
Mat. Res.. Publicado em: 14/11/2019
-
7. Influência da composição granulométrica das partículas de resíduos de madeira nas propriedades de compósitos minerais: parte 2: gesso-madeira
Resumo Resíduos de construção e demolição (RCD) de madeira podem ser incorporados em compósitos de fibras naturais, reduzindo os impactos ambientais, o que contribui para o desenvolvimento de materiais, produtos e processos mais sustentáveis. Nesse sentido, o objetivo deste estudo foi avaliar a influência da composição granulométrica das partícul
Ambient. constr.. Publicado em: 03/10/2019
-
8. Pervious concrete made with electric furnace slag (FEA): mechanical and hydraulic properties
Resumo O objetivo deste trabalho é viabilizar o uso de escória de forno elétrico (FEA) em substituição ao agregado graúdo convencional na fabricação de concreto permeável (CoPe), atingindo os parâmetros mínimos exigidos pela norma NBR16416/2015. Esta substituição minimizaria a utilização de agregados naturais, além de aproveitar um resíduo q
Rev. IBRACON Estrut. Mater.. Publicado em: 18/07/2019
-
9. HPGR as alternative to fused alumina comminution route: an assessment of circuit simplification potential
Abstract A considerable portion of energy consumption and, as a consequence, operational costs in mineral processing, is associated with comminution. High Pressure Grinding Rolls (HPGR) are appealing for their energy efficiency and resulting lower operating costs. This article evaluates this technology as an alternative to the conventional fused alumina comm
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
10. Field Description and Identification of Diagnostic Qualifiers for Urban Soils in Brazil
ABSTRACT Human activities often alter soils found in urban areas. These alterations affect their environmental functions and potential for use. However, soils from urban areas in Brazil have not been surveyed and identified, which can pose a technical problem for the development of the city. Considering the importance of urban environments and their soils, t
Rev. Bras. Ciênc. Solo. Publicado em: 19/06/2019
-
11. Efeitos do uso de areia de praia nas propriedades de argamassas mistas: análise da variação granulométrica
RESUMO Devido ao alto consumo de areia de rio na construção civil e sua extração abusiva, cujos resultados são a geração de diversos impactos ambientais, este estudo analisa a influência da utilização de areia de praia em substituição à areia proveniente de leito de rio na produção de argamassas de revestimento. A partir da areia de rio, foram
Matéria (Rio J.). Publicado em: 10/06/2019
-
12. Characterization of Algerian kaolins for utilization as a raw material in electrical insulators
Resumo O objetivo desta investigação foi caracterizar três amostras de caulim (DD1, DD2 e DD3) coletadas do depósito de Djebel Debbagh (leste da Argélia) para serem utilizadas em isoladores elétricos de porcelana. Análise granulométrica, fluorescência de raios X, difração de raios X, microscopia eletrônica de varredura e análise térmica (TG-ATD
Cerâmica. Publicado em: 06/06/2019