Casting Iron
Mostrando 1-12 de 24 artigos, teses e dissertações.
-
1. Maximization of the use of casting sand residue in the production of fired ceramic bricks
Abstract In this study, a red ceramic was developed with the addition of sand residue from deburring and finishing processing of cast iron molds, replacing a variable fraction of the clay. The formulated masses were shaped by pressing and firing at different temperatures (850, 900 and 1000 ºC) at a heating rate of 180 ºC/h and 2-hour level. The bodies were
REM, Int. Eng. J.. Publicado em: 2020-09
-
2. Análise da geração de energia elétrica por meio da utilização de conversores do tipo TEG em lingotamento contínuo de aços
RESUMO A fabricação do aço é um processo que requer enormes quantidades de recursos, como por exemplo combustíveis, minério de ferro, carvão, entre outros. Com a crescente preocupação com o meio ambiente, seja pelas cargas ambientais ou pelo aquecimento global, cresce também a necessidade do desenvolvimento de novas tecnologias que possibilitem um
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Microstructural, thermochemistry and mechanical evaluation of self-reducing pellets using electric arc furnace (EAF) dust containing zinc for Waelz process
ABSTRACT The increment of recycling of steel using electric arc furnace and the tendency to coat of steel products with zinc, in order to prevent corrosion, has increased the proportion of galvanized scrap used worldwide in the recent years. Approximately 10 to 20 Kg/t of cast steel is generated in casting arcs. These collected dusts electric arc furnace (EA
Matéria (Rio J.). Publicado em: 19/07/2018
-
4. Chemical and mineralogical characterization of silicon manganese iron slag as railway ballast
Abstract In nature, metal ores such as iron, lead, aluminum and others are found in an impure state, sometimes oxidized and mixed with silicates of other metals. During casting, when the ore is exposed to high temperatures, these impurities are separated from the molten metal and can be removed. The mass formed by these compounds is slag. Slag is the co-prod
REM, Int. Eng. J.. Publicado em: 2017-12
-
5. Influence of casting heterogeneities on microstructure and mechanical properties of austempered ductile iron (ADI)
ABSTRACT An investigation was carried out to examine the influence of as-cast heterogeneities on the resulting microstructure and mechanical properties of an austempered ductile cast iron (ADI). A commercial hypereutectic ductile iron alloy with 3.59% C, 2.68% Si, 0.24% Mn and 0.46% Cu (in wt. %) was produced in a coreless induction furnace. The specimens we
Matéria (Rio J.). Publicado em: 10/08/2017
-
6. Effects of Solidification Rate in the Microstructure of Al-Si5Cu3 Aluminum Cast Alloy
Aluminium alloy Al-Si5Cu3 (319) is one of the most commonly used casting alloys for automobile components, due to its casting characteristics. Iron is the major impurity element that influences the detrimental β-phase formation in secondary aluminum alloys. In the present study, we investigated the influence of the cooling rate on the formation of iron comp
Mat. Res.. Publicado em: 20/07/2017
-
7. Evaluation of the properties of iron oxide-filled castor oil polyurethane
The aim of this study was to obtain and evaluate the electrical, thermal and mechanical properties of iron oxide-filled castor oil polyurethane (PU/Fe2O3). The iron oxide used in this study was a residue derived from the steel pickling process of a Brazilian steel rolling industry. Polymeric composites with different iron oxide volume fractions (2.5, 5.0, 7.
Mat. Res.. Publicado em: 26/10/2012
-
8. Uma contribuição ao estudo do torneamento em eixo comando de motores de ferro fundido cinzento / A turning contribution study to gray casting iron engine camshaft
A busca pela competitividade industrial tem sido a tônica dos últimos tempos. Uma das formas de se atingir alto nível nesse quesito é a diminuição dos custos de fabricação. A usinagem é um dos processos de fabricação mais importantes quando se necessita de tolerâncias mais precisas. Dentro da usinagem, um dos processos que apresentam maior custo
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/07/2011
-
9. The effect of adding boron in solidification microstructure of dilute iron-carbon alloy as assessed by phase-field modeling
Alloying element like boron, even in small addition, is well known to improve hardenability of steels. Its application can improve mechanical properties of steels and reduce alloying costs. Despite these benefits is not easy to cast boron steels, mainly in dynamical solidification process like continuous casting, due to their crack susceptibility1,2. The str
Materials Research. Publicado em: 20/05/2011
-
10. Caracterização eletrocrômica de um sistema de valência mista de ferro(II,III) contendo o ligante tetra-2-piridil-1,4-pirazina (TPPZ) / Electrochromic characterizaton of a mixed system of Valencia iron (II, III) the ligand conteining tetra -2-pyridyl-1,4-pyrazine (tppz)
Sistemas de valência mista, em particular aqueles baseados em oligômeros de metais de transição como o azul da Prússia (Prussian Blue, PB) e seus análogos, têm sido amplamente investigados devido a potencial aplicação em dispositivos eletrocrômicos. Neste trabalho foram investigados as propriedades eletroquímicas e eletrocrômicas de filmes de um
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 19/11/2010
-
11. Uma contribuição a melhoria do processo de fresamento de ferro fundido vermicular - CGI / A contribution to the improvement of the milling process machining compacted graphite iron - CGI
Since the beginning of this century, researches about the development of diesel engines have been intensified, aiming to increase its energy efficiency and to reduce the levels of emission of pollutants. One the way to increase this efficiency is to increase the peaks of pressure of fuel explosion in the combustion chamber. The grey casting iron material is
Publicado em: 2009
-
12. Parametros termicos e estruturais em ferros fundidos cinzento e nodular solidificados em moldes de areia e unidirecionalmente / Thermal and structural parameters in gray and ductile cast irons solidified in sand molds and under unidirectional conditions
In the present work unsteady state unidirectional solidification of a hypoeutectic gray cast iron and of a eutectic ductile cast iron is applied to analyze the influence of the process parameters an the flake and nodule count. For comparison purpose some samples were cast in sand molds. The experimental results of temperature variation in the casting were us
Publicado em: 2009