Ceramic Samples
Mostrando 1-12 de 214 artigos, teses e dissertações.
-
1. The influence of compositional variability of dimension stone residues on the properties of rustic porous ceramic tiles
Abstract This study analyzed how the compositional variability of dimension stone residues influences the characteristics of rustic porous ceramic tiles. The specimens were prepared by adding 20 wt% of dimension stone residue to the clay and sintered at 1000 °C for 1 h. The testing assays performed were physical properties and structural analysis through sc
Cerâmica. Publicado em: 2023
-
2. Colorimetric analysis of dental porcelains: effects of the background color
Abstract This study evaluated how the background (white or gray) affects the color parameter measurements and color difference calculations (∆Eab and ∆E00) of dental ceramics. Disc-shaped feldspathic ceramic specimens were prepared with two shades (enamel and dentin) and stained in red wine (7-day immersion). A spectrophotometer was used to perform color
Cerâmica. Publicado em: 2022
-
3. Properties and technical characteristics of Casira pottery, Jujuy, Argentina
Abstract In this work, the results of a multi-technique characterization of a type of pottery production with high cultural and economic relevance from the only potter town in Argentina are presented and correlated. Raw materials, a prepared paste, and ceramic samples were studied. Chemical, structural, textural, microstructural, and thermal features were as
Cerâmica. Publicado em: 2022
-
4. Microstructure and diametral fracture strength of spark plasma sintered WC-6Co-0.2B and WC-6Co-0.5B ceramic composites from nanosized and metastable WC powders
Abstract The present work aimed at evaluating the microstructures and mechanical properties of spark plasma sintered WC-6 wt% Co ceramic composites doped with boron (0.2 and 0.5 wt%). W-50 at% C (W-6.13 wt% C) powders produced under different milling times (20, 60, 180, and 600 min) were used as starting materials and subsequently mixed with Co (6 wt%) and B
Cerâmica. Publicado em: 2022
-
5. PROCESSING OF A METAL CONCENTRATE FROM GROUND WASTE PRINTED CIRCUIT BOARDS IN ACIDIC MEDIA USING HYDROGEN PEROXIDE AS OXIDANT
The recovery of precious and base metals of a metal concentrate from ground waste printed circuit boards (PCBs) is described in detail. Samples were treated with NaOHaq. to remove the soldering mask. Experiments were performed in acidic medium (HF, H2SO4, CH3COOH or H3PO4) using H2O2 as oxidant. Base metals were leached in high yields (>99 wt.%) at ~40 ºC a
Quím. Nova. Publicado em: 20/07/2020
-
6. The Tatuí Formation as a source of raw material in the ceramic pole of Santa Gertrudes (SP)
Abstract The importance of the Santa Gertrudes Ceramic Complex (SGCC) in the ceramic market is directly associated with the high quality of the Corumbataí Formation clays used in the manufacture of its products. Although the volumetric capacity of the Corumbataí Formation is able to meet the SGCC demand for the coming years, its industries are always in se
REM, Int. Eng. J.. Publicado em: 2020-03
-
7. Evaluation of the Effect of the Incorporation of Blends of Fuel and Fluxing Wastes in Red Clay Ceramics
The clay samples endure the incorporation of industrial and urban wastes, which do not cause large variations in their properties if added in controlled quantities. Wastes can be classified as fuel, fluxing and property affecting wastes. The fuel wastes usually have a high amount of organic matter, that when heated cause exothermic reactions, releasing heat
Mat. Res.. Publicado em: 09/12/2019
-
8. Study of Structural and Electric Properties of the PZT 52/48 Doped With Er+3
The scientific community has shown a growing interest in relating to the ferroelectric materials and it has made an effort to develop them. Among these several ferroelectric materials, we proposed to investigated Pb(ZrTi)O3 doped with distinct Er+3 concentrations. Our aim was to investigate how the erbium affects the PZT electrical properties. To determine t
Mat. Res.. Publicado em: 25/11/2019
-
9. Síntese de perovskitas tipo LaAl1-xCrxO3 para aplicação em esmalte transparente
RESUMO No Brasil, estudos sobre pigmentos cerâmicos ainda são bastante escassos. Por esta razão, grande parte dos pigmentos consumidos pela indústria cerâmica são importados dos países europeus. Outra parte destes pigmentos são obtidos pela rota cerâmica, entretanto, esta rota de síntese resulta em pigmentos com propriedades bastante heterogêneas,
Matéria (Rio J.). Publicado em: 25/11/2019
-
10. Efeito da adição de resíduo de vidro em massa de cerâmica de alvenaria
RESUMO Este trabalho investigou o efeito da adição de resíduo de vidro para fabricação de cerâmica de alvenaria. Foram conformados corpos-de-prova cilíndricos de 27 mm de diâmetro por 45 mm de altura, a partir da massa padrão de uma indústria de cerâmica vermelha e outras 3 formulações (5, 10 e 20%) com incorporação de vidro, baseado em estudo
Matéria (Rio J.). Publicado em: 25/11/2019
-
11. Preparation of low-cost ceramic membranes for microfiltration using sugarcane bagasse ash as a pore-forming agent
Resumo Membranas cerâmicas são de grande interesse industrial em processos de separação. Elas são caracterizadas por elevada estabilidade química/térmica e capacidade de filtração em temperaturas acima de 500 °C em uma larga faixa de valores de pH. Entretanto, a grande desvantagem das membranas cerâmicas é o elevado custo de produção envolvendo
Cerâmica. Publicado em: 14/11/2019
-
12. Caracterização e aproveitamento dos resíduos de argila e argilito provenientes da extração de gipsita no município de Araripina-Brasil como matérias-primas para cerâmica vermelha
Resumo O objetivo deste trabalho foi a caracterização e o aproveitamento dos resíduos de duas argilas (B e C, coletadas em diferentes camadas do capeamento) e argilito, gerados da extração da gipsita no município de Araripina, para a aplicação em cerâmica vermelha. Foram preparados os corpos de prova cerâmicos utilizando as argilas residuais com a
Cerâmica. Publicado em: 14/11/2019