Characterization Of Polymers
Mostrando 1-12 de 248 artigos, teses e dissertações.
-
1. Characterization and mechanical properties of one-part geopolymer based on a pure metakaolin
Abstract Geopolymers are amorphous silicate polymers that have been extensively studied due to their applications, scientific and technical relevance, and their potential as cement in substitution to Portland. Much of the focus has been in the use of precursors and aggregates that are rarely pure and homogeneous with the use of tailings being very common. Th
REM - International Engineering Journal. Publicado em: 2022
-
2. Application of Glycerol in the Synthesis of Hyperbranched and Highly Branched Polyethers: Characterization, Morphology and Mechanism Proposal
Hyperbranched biopolymers is an important class of polymer that is used in different areas, mainly in biomedicine. AB2 monomers are crucial to the development of a "hyperbranched" architecture of polyglycerol, being glycidol the most commonly used, even considering its environmental hazard. Glycerol carbonate is an ecologically accepted monomer synthesized d
Mat. Res.. Publicado em: 24/10/2019
-
3. Microbial Synthesis and Characterization of Biodegradable Polyester Copolymers from Burkholderia Cepacia and Cupriavidus Necator Strains Using Crude Glycerol as Substrate
Abstract Polymers are materials of pronounced importance in the modern world, since they are massively present in everyday life, especially in the form of packaging. However, most of these materials are derived from non-renewable sources and their disposal generates large volumes of waste, which is extremely damaging to natural environments. In this context,
Braz. arch. biol. technol.. Publicado em: 24/10/2019
-
4. Gold Nanoparticles and [PEDOT-Poly(D,L-Lactic Acid)] Composite: Synthesis, Characterization and Application to H2O2 Sensing
Biocompatible electrochemical devices are challenging to develop due to the toxicity of many advanced electrode materials and the difficulty to degrade the discarded material. Few recent advances were made in the synthesis of conducting biodegradable composites of polymers for electrode materials. In this article we describe the synthesis of two new inorgani
J. Braz. Chem. Soc.. Publicado em: 21/10/2019
-
5. Development and in vitro/in vivo evaluation of thermo-sensitive in situ gelling systems for ocular allergy
Ocular allergy is one of the most common disorders of the eye surface. Following diagnosis this condition is typically treated with preparations containing antihistamines. However, anatomy of the eye and its natural protective mechanisms create challenges for ocular drug delivery. Rapid elimination of antihistamine substances due to short residency times fol
Braz. J. Pharm. Sci.. Publicado em: 23/09/2019
-
6. Adding value to polystyrene waste by chemically transforming it into sulfonated polystyrene
ABSTRACT Polystyrene (PS), one of the most used polymers in everyday life, has a low recycling rate due to its inexpensive virgin resin. In order to make polystyrene waste (WPS) recycling advantageous, it is possible to change it chemically, introducing heteroatoms in the polymer chain thus transforming the waste into a material with more added value. In thi
Matéria (Rio J.). Publicado em: 16/09/2019
-
7. Synthesis and Characterization of Modified Polystyrene with Oleic Acid and an Allyl Ester Derivative
Polystyrene (PS) is one of the most widely used polymers in the world, having a wide applicability. PS can be used in pure or modified forms, and the commercial materials most used for modifications are non-renewable and have high costs. For this reason, studies have been carried in order to evaluate renewable components application such as vegetable oils, f
Mat. Res.. Publicado em: 05/09/2019
-
8. Study on influence of polymer and surfactant on in vitro performance of biodegradable aqueous-core nanocapsules of tenofovirdisoproxil fumarate by response surface methodology
The major objective of this study was to investigate the effect of biodegradable polymer type and surfactant concentration on various characteristics viz. particle size, entrapment efficiency and drug release rate constant of aqueous core nanocapsules (ACNs) containing tenofovirdisoproxil fumarate. In this study, the nanocapsules were prepared by modified mu
Braz. J. Pharm. Sci.. Publicado em: 12/08/2019
-
9. ASSESSMENT OF POLYHYDROXYALKANOATE SYNTHESIS IN SUBMERGED CULTIVATION OF Cupriavidus necator AND Burkholderia cepacia STRAINS USING SOYBEAN AS SUBSTRATE
ABSTRACT Polyhydroxyalkanoates (PHA) are biocompatible and biodegradable polyesters produced by prokaryotic microbes for energy storage and carbon reserve. These polymers are an option to diminish the massive impact caused by inadequate disposal of synthetic plastics. In this study, evaluation and characterization of PHA produced by Cupriavidus necator (IPT
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
10. Compatibility and characterization of Bio-PE/PCL blends
Abstract In this work, blends based on environmentally friend polymers such as Biopolyethylene (Bio-PE), Polycaprolactone (PCL) and Polyethylene graft maleic anhydride (PEgMA) added as compatibilizer agent were produced by conventional extrusion, aiming to produce bio-blends with synergic properties at low processing cost, being at same time non-polluting an
Polímeros. Publicado em: 10/06/2019
-
11. Physicochemical, microbiological and parasitological characterization of the filter backwash water from a water treatment plant of Blumenau - SC and alternatives for treatment and reuse
Resumo A água de retrolavagem dos filtros (ARF) de estações de tratamento de água (ETA) é composta por resíduos da água bruta, produtos químicos e microrganismos. Seu descarte inadequado impacta negativamente o meio ambiente e a saúde da população humana. Objetivando caracterizar a ARF da ETA de Blumenau-SC, foram realizadas avaliações físico-q
Rev. Ambient. Água. Publicado em: 03/06/2019
-
12. Preparation and physicochemical characterization of prazosin conjugated PLGA nanoparticles for drug delivery of flutamide
In the current work, a sustained drug delivery system of flutamide (FLT) was developed using Poly(D,L-lactide-co-glycolide) (PLGA) decorated bypoly(ethylene glycol) (PEG) grafted prazosin (PLGA-PEG-Praz) as a targeting moiety. In a multi-step reaction, PLGA was linked to PEG and prazosin. The structure of the synthesized polymers was confirmed by FTIR and 1H
Braz. J. Pharm. Sci.. Publicado em: 08/04/2019