Charpy Impact
Mostrando 1-12 de 53 artigos, teses e dissertações.
-
1. Effect of titanium and nitrogen inoculation on the microstructure, mechanical properties and abrasive wear resistance of Hadfield Steels
Abstract The effect of titanium and nitrogen addition on Hadfield steels was investigated. In order to do this, two grades of steels were produced in terms of titanium and nitrogen addition. The final samples had their microstructure characterized and their mechanical properties were evaluated by uniaxial tensile and Charpy impact tests. Furthermore, the wea
REM, Int. Eng. J.. Publicado em: 2020-03
-
2. Aço de alta dureza para aplicação balística: propriedades mecânicas
RESUMO Blindagens balísticas são projetadas a resistir determinadas ameaças, que dependem da aplicação. Estas ameaças podem ser geradas por projéteis de armas de fogo ou estilhaços provenientes de explosões com diferentes energias cinéticas. Os materiais normalmente utilizados para este propósito são metálicos, não metálicos e compósitos, sen
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Comportamento de Juntas Soldadas de Aço C-Mn Obtidas Pelo Processo GMAW-RE com Eletrodo Rotativo
Resumo O presente trabalho tem como objetivo estudar o comportamento de juntas soldadas obtidas pelo processo GMAW com eletrodo rotativo (GMAW-RE), de modo a permitir uma análise comparativa de produtividade e propriedades mecânicas com o processo GMAW convencional (GMAW). Foram realizadas soldagens multipasse pelos dois processos GMAW com preaquecimento d
Soldag. insp.. Publicado em: 27/06/2019
-
4. Análise das Propriedades Mecânicas de Juntas de Aço Carbono Estrutural Soldadas pelo Processo Arco Submerso com os Arcos Simples e Duplo (Tandem-Arc)
Resumo Diante de um cenário econômico onde a concorrência é cada vez mais acirrada, a busca por processos, técnicas e equipamentos de soldagem que proporcionem ganhos na produtividade é uma exigência para garantir a competitividade das empresas no mercado. Com o desenvolvimento e a adoção de novas tecnologias é possível inovar os processos convenc
Soldag. insp.. Publicado em: 13/06/2019
-
5. Effect of the Chemical Homogeneity of a Quenched and Tempered C-Mn Steel Pipe on the Mechanical Properties and Phase Transformations
Seamless steel pipes for application in the oil and gas industries are manufactured from quenched and tempered steel. Aiming to meet the required characteristics, it is necessary that the microstructure and the mechanical properties are homogeneous along the wall thickness of the pipes, which is even more critical for thick wall pipes. Considering the seamle
Mat. Res.. Publicado em: 03/06/2019
-
6. Characterization of hibiscus sabdariffa fiber as potential reinforcement for denture acrylic resins
ABSTRACT This study aimed to determine the characteristics of Hibiscus sabdariffa as a fiber-reinforcement material for denture acrylic resins. The Hibiscus sabdariffa fiber was extracted by hot water retting. The fiber was treated at room temperature in aqueous solution of NaOH for 8 hours at 8% concentration. Micrometre gauge and Field emission scanning el
Matéria (Rio J.). Publicado em: 06/12/2018
-
7. The effect of the austenite grain refinement on the tensile and impact properties of cast Hadfield steel
This paper studied the effect of the austenite grain refinement on the tensile and impact properties of a cast Hadfield steel (12 % Mn, 1.2 %C and 0.65 % Si). The austenite grain refinement was obtained by hafnium inoculation. Microstructural characterization showed that the Hf-refined cast Hadfield steel featured a grain size of 600 µm, while the non-refin
Mat. Res.. Publicado em: 02/08/2018
-
8. Método innovador de ensayos de impacto en altas temperaturas aplicado en aceros al carbono
ABSTRACT In this paper, an innovative method of impact tests at high temperature on sub-size Charpy V notched specimens is applied. The innovation lies in the method of heating the specimen, which is performed in situ on a Charpy impact machine type by alternating electrical current through the specimen. The specimens are heated in a few seconds (v=32 ºC/s)
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Fracture Toughness and Charpy CVN Data for A36 Steel with Wet Welding
Abstract This study presents KIC data obtained from KIC-CVN correlations from Charpy CVN values. For this study, T-welded connections were manufactured from ASTM A36 and E6013 electrodes in dry conditions. Then, a rectangular grinding at the weld toe was carried out and filled with wet welding. Charpy specimens were extracted to obtain CVN values. An exhaust
Soldag. insp.. Publicado em: 2017-09
-
10. Efecto de la Composición Química del Metal de Aporte y del Calor Aportado Sobre la Microestructura y las Propiedades Mecánicas de Juntas Soldadas de Aceros Inoxidables Dúplex
Abstract Duplex stainless steels are characterized by good weldability and mechanical properties; they also present a high resistance to general and localized corrosion. They are the main materials when welding pipes with high requirements in different industries, mainly oil and gas. These steels have a microstructure consisting of two phases: 50% austenite
Soldag. insp.. Publicado em: 2017-06
-
11. Reinforcement of Polyester with Renewable Ramie Fibers
Ramie (Boehmeria nivea) fiber is one of several lignocellulosic fibers with superior strength, but the least investigated, particularly as reinforcement in strong, tough polymeric composites. This paper presents mechanical properties for polyester reinforced with aligned ramie fibers up to 30% by volume. It was found that adding 30 vol% of ramie fibers incre
Mat. Res.. Publicado em: 11/05/2017
-
12. Influence of Heat Treatments on the Impact Toughness of a Ti-stabilized 12%Cr Supermartensitic Stainless Steel
The supermartensitic stainless steels (SMSS) are a relatively new class of corrosion resistant alloys developed to obtain a better combination of weldability, strength, toughness and corrosion resistance than conventional martensitic stainless steels. The final properties of SMSS are strongly influenced by quenching and tempering heat treatments. In this wor
Mat. Res.. Publicado em: 16/02/2017