Chemical Residual Elements
Mostrando 1-12 de 13 artigos, teses e dissertações.
-
1. Manufacture of custom-made cranial implants from DICOM® images using 3D printing, CAD/CAM technology and incremental sheet forming
INTRODUCTION: This work aims to pre-operatively manufacture custom-made low-cost implants and physical models (‘biomodels’) of fractured skulls. The pre-DOI: operative manufacturing of biomodels and implants allows physicians to study and plan surgery with a greater possibility of achieving the expected result. Customization contributes to both the esthe
Rev. Bras. Eng. Bioméd.. Publicado em: 2014-09
-
2. Interdiffusion studies on hot rolled U-10Mo/AA1050
The U-Mo alloys are investigated with the goal to become nuclear material to fabricate high-density fuel elements for high performance research reactors. The enrichment level (20% 235U) suggests that the U-Mo alloys should be between 6 to 10 wt. (%), which can reach up to 9 gU.cm-3 in fuel density. Nevertheless, the U-Mo alloys are very reactive with Al. Int
Mat. Res.. Publicado em: 02/10/2012
-
3. DEVELOPMENT OF METHOD FOR DETERMINATION OF AS, SB AND SE IN BIODIESEL AND PETROLEUM BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY WITH SAMPLE INTRODUCTION BY HYDRIDE GENERATION (HG ICP / DESENVOLVIMENTO DE MÉTODO PARA DETERMINAÇÃO DE AS, SB E SE EM BIODIESEL E PETRÓLEO POR ICP OES COM INTRODUÇÃO DE AMOSTRA POR GERAÇÃO DE HIDRETOS
With the increasing world population and the consequent increasing in industrial activities and fuel consumption, chemical pollution has been a major problem of the XXI century. Alternatives that can minimize such problems are targets of researches, such as the use of biodiesel, a renewable and less polluting fuel. Elements usually found in low concentration
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/03/2011
-
4. Uso de biossólido em plantios florestais.
ABSTRACT: With the increase of the population density in the cities, a great amount of residual waters passed to be generated. The usual practical ones of disposal of the sewage sludge, as the "sanitary and controlled embankment" or the "oustings the opened sky", are alternative of cost to each day more raised or have potential to produce impacts ambient und
Planaltina. Publicado em: 2011
-
5. Fracionamento de Ba, Cr, Cu, Ni e Zn em solos tratados com lodo de esgoto em experimentos de longa duração
As the agronomic importance of the provision of agricultural sewage sludge, and its growing concerning environmental point of view, in this work decomposition procedures of soil samples subjected to the addition of sewage sludge were evaluated for total content determination of Ba, Cd, Cr, Cu, Ni, Pb and Zn; the contents of the aforementioned elements presen
Publicado em: 2010
-
6. Extração seletiva de metais pesados em sedimentos de fundo do Rio Tietê, São Paulo
Sediment samples from Tietê river were submitted to chemical and sequential extractions of heavy metals (Cd, Cr, Cu, Ni, Pb and Zn). It was followed a single extraction by using 0.1 mol L-1 hydrochloric acid and a sequential procedure to evaluate possible chemical associations described as exchangeable, carbonate, reducible oxides, sulfide, organic matter a
Química Nova. Publicado em: 2009
-
7. Sewage sludge application in cane-plant as nitrogen and phosphorus source and its environmental effects / Aplicação de lodo de esgoto em cana-planta como fonte de nitrogênio e fósforo e seu impacto ambiental
The potential agricultural use of the sewage sludge is due to their organic matter and nutrients contents, mainly nitrogen and phosphorus, the most important constituint. However, there is a lack of research to adequate the nitrogen and phosphate fertilizer doses to be applied in agricultural fields treated with this residue. Despite the evident benefits of
Publicado em: 2009
-
8. Simulação numérica da migração de elementos metálicos e do monômero -caprolactama de embalagens poliméricas irradiadas para simulantes de alimentos / SIMULATION STUDY OF -CAPROLACTAM MONOMER AND METALLIC ELEMENTS MIGRATION FROM IRRADIATED POLYMERIC PACKAGING INTO FOOD SIMULANTS
For decades migration study of chemical compounds from packaging into food, such as metals, residual monomers and additives, is a very important issue, concerning public health and minimize chemical contamination. In this work, it was done irradiations of packagings taken in contact with food simulant, and it was studied this migration through a mathematical
Publicado em: 2008
-
9. N. Machinability of low carbon free-machining leaded steel ABNT 12L14 with different levels of residual elements (chromium, nickel and cooper) / Usinabilidade do aço de corte-fácil baixo carbono ao chumbo ABNT 12L14 com diferentes níveis de elementos químicos residuais (cromo, níquel e cobre)
The purpose of this thesis was to study the machinability of low carbon free-machining leaded steel (ABNT/AISI 12L14) with different levels of residual (tramp) elements such as chromium, nickel and copper. Nine batches of steel were produced with controlled chemical composition, and with alterations in the mentioned residual levels so as to apply two levels
Publicado em: 2007
-
10. Utilização de areia de fundição residual para uso em argamassa
This work studies the use of a residual foundry sand as raw material in mortars for building material applications. The residue used (residual foundry sand) was supplied by a foundry industry from Joinville-SC and is classified as residue class II, according to the Brazilian normatization NBR 10004/87. The residue and the ordinary sand were characterized by
Publicado em: 2005
-
11. STUDY OF THE CHEMICAL SPECIATION OF ARSENIC AND SELENIUM IN WATER CURRENTS AND LIQUID EFFLUENTS OF PETROLEUM REFINERIES / ESTUDO DA ESPECIAÇÃO QUÍMICA DE ARSÊNIO E SELÊNIO EM CORRENTES AQUOSAS E EFLUENTES DE REFINARIA DE PETRÓLEO
The concentrations of arsenic in oil can vary of 10 the 30 mgkg-1. The selenium is found in effluent of the petroliferous industry, had its presence in the oil, between 0.03 -1,4 mg.L-1 depending on its geochemistry origin. For chemical reasons, arsenic shows a high affinity to sulfur, similar as selenium, thus following this element through the whole petrol
Publicado em: 2005
-
12. Estudo das propriedades fisico-quimicas de catalisadores a base de CeO2 e Pd-CeO2 modificados por alcalinos I
The objective of this work was to study the physico-chemical and catalytic properties of ceO2 and Pd-CeO2 systems. Cerium oxides of high (C400) and low (C850) surface area and cerium oxides doped with sodium and barium compounds were used in this study. It was also analysed the influence of residual contaminants such as carbonates and nitrates on the propert
Publicado em: 1995