Circuit
Mostrando 1-12 de 1580 artigos, teses e dissertações.
-
1. A High-Selectivity Bandpass Filter Using Dual-Mode Coupling Resonator
Abstract In this work, a new model of high selectivity dual-mode bandpass filter is presented. The proposed filter consists of a set of coupled lines with a dual-mode adjustable response in its design process. An improvement in selectivity is presented by combining the dual-mode element with a classic band rejection structure, thus making it possible to intr
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Determination of Electric and Magnetic Field Calculation Uncertainty in the Vicinity of Overhead Transmission Lines
Abstract This paper presents a new approach for uncertainty determination of the electric field intensity and magnetic flux density calculation in the vicinity of overhead transmission lines. The proposed method is based on the law of propagation of uncertainty as defined in the Guide to the expression of Uncertainty in Measurement. A mathematical model is d
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. Design and Implementation of Microwave Dual-Band Pass Interdigital Filter Using an Analytical Approach
Abstract In this paper, benefiting from frequency transformation between the normalized frequency domain of low-pass prototype frequencies and the real frequency domain of the filter, a purely analytical procedure for dual-band filter design is used. The coupling matrix of the filter is analytically extracted, without the need to perform numerical optimizati
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
4. Performance analysis of the beneficiation process of bauxite from the Juruti Mine. Industrial sampling and performance evaluation
Abstract Sampling campaigns were conducted at the industrial bauxite wash circuit of the Juruti Bauxite Mine in Pará, Brazil. The beneficiation circuit consisted of crushing, scrubber washing, wet screening, hydrocyclone classification, and fltration. Considering laboratory processing of samples and statistical analyses of historical operation databases, ma
REM - International Engineering Journal. Publicado em: 2022
-
5. Microstrip 3-Bit Fractal-based Phase Shifter
Abstract This paper presents the implementation of a 3-bit microstrip fractal-based phase shifter operating in the 430 MHz to 470 MHz frequency range. The fractal structure is used to confine different delay line lengths in the same area due to the space-filling properties of the used Hilbert fractal curve. The proposed design has three bits corresponding to
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
6. Extracorporeal Membrane Oxygenation (ECMO) Training Program in A Pediatric Cardiac Intensive Care Unit: An 8-Year Single-Center Experience in Argentina
ABSTRACT Introduction: Extracorporeal membrane oxygenation (ECMO) for temporary cardiopulmonary support is one of the most intense and technologically complex therapies offered in medicine. It is a high-risk procedure that requires specific knowledge and technical skills to perform it with good results. Objective: The main goal of this study is to describe
Brazilian Journal of Cardiovascular Surgery. Publicado em: 2022
-
7. Boosting the Photocurrent of the WO3/BiVO4 Heterojunction by Photoelectrodeposition of the Oxy-Hydroxide-Phosphates Based on Co, Fe, or Ni
Here we investigated the photoelectrodeposition of oxygen-evolving catalysts (OECs) based on oxy-hydroxides-phosphates of Co, Fe, or Ni (CoPi, FePi, and NiPi) on the WO3/BiVO4 heterojunction and their activity in water oxidation. The OECs were deposited by cycles of (i) open-circuit potential (OCP) and (ii) applying a potential positive enough to oxidize the
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
8. A Design of a Compact Microwave Diplexer in Microstrip Technology Based on Bandpass Filters Using Stepped Impedance Resonator
Abstract This paper describes the design of a compact microstrip microwave diplexer based on bandpass filters and a stepped impedance resonator for 4G applications. The diplexer is composed of two band-pass filters (BPF) that operate at 1.8 and 2.5 GHz. Both bandpass filters for the receiver at 1.705-1.895 GHZ and the transmitter at 2.41-2.6 GHZ have a -3dB
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
9. Radiation Efficiency of an Electrically Small Dual-band UHF Microstrip Patch Antenna Using Wheeler Cap Method
Abstract Determining the radiation efficiency of an antenna is a difficult task that becomes challenging when it is about electrically small antennas. This work investigates the applicability of the Wheeler cap method to measure the radiation efficiency of a UHF dual-band compact microstrip patch antenna. An overview of Wheeler method is presented. An adapta
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
10. A 2.4 GHz Coplanar Solar Cell Patch Antenna with a Semi-Analytical Evaluation of Temperature Effects
Abstract Solar cells integrated with antennas have aroused scientific interest as an attractive energy source alternative in low power devices for IoT and Wireless Sensor Network applications. Since the space for all components in the systems is scarce, different integration ideas have been proposed in this field. However, further analysis of the performance
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
11. Percutaneous tracheostomy in COVID-19 patients: a new apneic approach
Abstract Background: Percutaneous dilation tracheostomy is an aerosol-generating procedure carrying a documented infectious risk during respiratory virus pandemics. For this reason, during the COVID-19 outbreak, surgical tracheostomy was preferred to the percutaneous one, despite the technique related complications increased risk. Methods: We describe a ne
Brazilian Journal of Anesthesiology. Publicado em: 2022
-
12. Proposed Technique of Analysis for Absorber/Transmitter Frequency Selective Surfaces
Abstract In this paper, we propose a simple technique to analyze absorber/transmitter frequency selective surfaces (FSS). The structure is formed by two FSS, one resistive and one conductive. Both FSS are printed on an FR4 dielectric substrate. The square loop and crossed dipole are the geometries considered in this paper. The technique combines two simple a
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-06