Composite Elements
Mostrando 1-12 de 231 artigos, teses e dissertações.
-
1. Optimum design of steel columns filled with concrete via genetic algorithm: environmental impact and cost analysis
Abstract The use of concrete-filled tubular columns as part of structural systems has steadily increased throughout the years. The growing demand for structural elements of this nature is a direct result of the possibility to use various cross-section shapes that have increased strength, along with resistance to fire and other corrosive agents. The main obje
REM - International Engineering Journal. Publicado em: 2022
-
2. Production of nanostructured crystalline composite using residual ashes from flocculated sludge burning process in a poultry slaughterhouse wastewater treatment system
Abstract Nanostructured crystalline composite (activated carbon) was synthesized from residual ashes of the burning process of the sludge generated in the flotation step of a poultry slaughterhouse and was used for Allura red dye adsorption. The ashes were chemically activated using two types of reagents, H2O2 and H3PO4, and the structure, morphology, and su
Cerâmica. Publicado em: 2022
-
3. Numerical formulation for nonlinear analysis of concrete and steel shells with deformable connections
Abstract A two-dimensional interface finite element capable of associating flat shell elements positioned one above the other was developed. The implemented interface element can physically simulate the contact between the flat shell elements and connect the reference planes of the shell elements above and below it. The formulation presented allows considera
REM, Int. Eng. J.. Publicado em: 2021-09
-
4. Numerical analysis of collapse modes in optimized design of alveolar Steel-concrete composite beams via genetic algorithms
Abstract The objective of this study is to present the formulation and applications of the optimization problem of steel-concrete composite alveolar beams. In addition to presenting the formulation, a comparative analysis of the predominant collapse modes is performed numerically via the finite element method. The optimization program was developed with the
REM, Int. Eng. J.. Publicado em: 2021-06
-
5. Arsenic and Other Elements Determination in Seawater Using Coprecipitation and Standard Mode Inductively Coupled Plasma Mass Spectrometry
The present work aims the determination of As, Co, Cr, Cu, Mn and Pb in seawater samples using coprecipitation extraction procedure before standard mode inductively coupled plasma mass spectrometry (ICP-MS) (no collision/reaction cell). The coprecipitation procedure is based on the precipitation of Mg(OH)2 from the reaction of the Mg2+ ions (present into the
J. Braz. Chem. Soc.. Publicado em: 2021-01
-
6. Upconversion 3D Printed Composite with Multifunctional Applications for Tissue Engineering and Photodynamic Therapy
Upconversion nanoparticles (UCNPs) are suitable materials for bioapplications due to their ability to emit visible light under near infrared (NIR) excitation, in the biological transparency range. Polycaprolactone(PCL)-based scaffolds are widely used in tissue engineering in combination with inorganic compounds to improve bioactivity and osteoconductive prop
J. Braz. Chem. Soc.. Publicado em: 2020-04
-
7. Nonlinear numerical analysis of composite slabs with steel decking
Resumo O comportamento das lajes mistas é governado pelo cisalhamento longitudinal na interface entre o aço e o concreto, que é desenvolvido em lajes sob flexão simples. O método m-k e o método da interação parcial, utilizados no cálculo da resistência ao cisalhamento na interface aço-concreto de lajes mistas, são baseados em ensaios experimentai
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
8. Experimental evaluation on the structural behavior of truss shear connectors in composite steel-concrete beams
Resumo As estruturas mistas apresentam grandes vantagens quanto a aspectos estruturais e construtivos, sendo os conectores de cisalhamento determinantes para a obtenção da interação entre os elementos estruturais e para a distribuição dos esforços na estrutura, aproveitando-se de forma efetiva da potencialidade de cada material constituinte da estrutu
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
9. Obtaining Composites Powders of Al2 O3 / Ni and Al2 O3 / Nb by Mechanical Alloying
Mechanical alloying (MA) can be highlighted among the various methods and powder processing forms, which consists of producing homogeneous materials from elementary powders. This process is of paramount importance as it has the ability to reduce the particle size of the powders and can often promote bonding between elements which have low interaction and wet
Mat. Res.. Publicado em: 14/10/2019
-
10. Some Aspects of Numerical Modeling of Steel-Concrete Composite Beams with Prestressed Tendons
Abstract Aspects about the numerical modeling of three-dimensional prestressed steel-concrete composite beams by using the finite element (FE) method are highlighted and commented in this work. Emphasis is given to the numerical treatment of bonded and unbonded tendons. The proposed modeling technique uses curved beam and catenary elements for simulating int
Lat. Am. j. solids struct.. Publicado em: 15/08/2019
-
11. Two-Dimensional Numerical Model of the Fracture Process in Steel Fibre Reinforced Concrete with the Continuum Strong Discontinuity Approach and Functional Data Analysis
Abstract This paper presents the formulation of a two-dimensional numeri-cal model able to describe the fracture process in structural mem-bers of steel fibre reinforced concrete (SFRC) from the volume ratio of the fibres and the mechanical properties of the compo-nents: a concrete matrix and a set of steel fibres with a random orientation. The relationship
Lat. Am. j. solids struct.. Publicado em: 08/04/2019
-
12. Synthetic granite composite for precision equipment structures
ABSTRACT The structure is a component that plays an extremely important role in the equipment’s performance, it must withstand efforts without compromising the function, receive and transfer heat, dampen vibrations and position the elements, as well as promote ergonomics and aesthetics. In lightweight and precision equipment’s the raw material used must
Matéria (Rio J.). Publicado em: 06/12/2018