Compression Rate
Mostrando 1-12 de 164 artigos, teses e dissertações.
-
1. Hardening and Dynamic Recovery During Hot Compression Test of Copper Simulated as Viscoplastic Material
The Norton-Bailey equation was used to simulate by finite elements the hardening and dynamic recovery of copper during the hot compression tests. The constants of Norton-Bailey equation were determined from the Voce-Kocks model. The simulation assumes a Mortar Contact with Coulomb friction and axial symmetry. Numerical results were compared with experiments.
Mat. Res.. Publicado em: 05/12/2019
-
2. Recrystallization Kinetics of Fe-3%Si after Deformation at High Strain Rate and High Temperature
Recrystallization kinetics of Fe-3%Si with initial grain size 296~839µm at the temperature range 1223~1423K, strain range from 0.51 to 0.92, strain rate range 5~80s−1 was studied by isothermal compression test using Gleeble-2000. The effect of strain, strain rate, initial grain size and annealing temperature on the recrystallization kinetics were discusse
Mat. Res.. Publicado em: 07/11/2019
-
3. Mass Variation Rate, in Acidic Environment, of Polyhydroxybutyrate and Chitosan matrices with Potential Application as Controlled Drug Delivery System
Polymers such as the biocompatible polyhydroxybutyrate (PHB) and the polysaccharide chitosan (Chi), a pH-sensitive polymer, have been studied for drug delivery applications and scaffolds production. In this work, matrices of PHB and Chi were produced by compression molding (SPHB-Chi) and loaded with a broad-spectrum biocide chlorhexidine (CHX) (SPHB-Chi-CHX)
Mat. Res.. Publicado em: 30/09/2019
-
4. Fracture Load and Failure Mode of CAD-on Ceramic Structures
Resumo Este estudo avaliou a carga de fratura (Cf) e o modo de falha de estruturas cerâmicas fabricadas pela técnica CAD-on (Ivoclar Vivadent), testando as hipóteses de que a Cf das estruturas multicamadas é governada pela resistência da cerâmica de cobertura e o lascamento é mais frequente nas estruturas em multicamadas do que em monolíticas. Corpos
Braz. Dent. J.. Publicado em: 22/07/2019
-
5. Incision and Drainage with Daily Irrigation for the Treatment of Auricular Pseudocyst
Abstract Introduction Pseudocyst of the pinna is a rare condition that occurs when fluid accumulates in the intercartilagenous space of the auricle. The main goal when treating this condition is to keep acceptable cosmetic results with no recurrence rate. Objective To demonstrate the superior impact of incision and drainage of auricular pseudocysts with
Int. Arch. Otorhinolaryngol.. Publicado em: 18/07/2019
-
6. Double Identification of the Optimal Hot Deformation Parameter Windows for AlCu4SiMg Alloy
In order to achieve hot processing products with expected microstructures, the construction of corresponding relationships between micro-evolution mechanisms and hot processing parameters is essential. In this study, such corresponding relationships of as-cast AlCu4SiMg alloy were constructed by double evaluating processing maps and Zener-Holloman (Z) parame
Mat. Res.. Publicado em: 10/07/2019
-
7. Effect of Processing Parameters on Hot Deformation Behaviour and Microstructural Evolution of PM Ti-5553 Alloy at a Moderate-high Strain Rate
Isothermal compression tests of Ti-5553 (Ti-5Al-5V-5Mo-3Cr) alloy, produced by a fast consolidation approach from blended elemental powder mixture, were performed on a Gleeble® 3800 thermal-physical simulator to investigate its hot deformation behaviour. The samples were compressed in a wide temperature range from 700 ºC to 1150 ºC and a moderate-high str
Mat. Res.. Publicado em: 10/06/2019
-
8. Efeitos do uso de areia de praia nas propriedades de argamassas mistas: análise da variação granulométrica
RESUMO Devido ao alto consumo de areia de rio na construção civil e sua extração abusiva, cujos resultados são a geração de diversos impactos ambientais, este estudo analisa a influência da utilização de areia de praia em substituição à areia proveniente de leito de rio na produção de argamassas de revestimento. A partir da areia de rio, foram
Matéria (Rio J.). Publicado em: 10/06/2019
-
9. Multilevel Anterior Lumbar Interbody Fusion Combined with Posterior Stabilization in Lumbar Disc Disease- Prospective Analysis of Clinical and Functional Outcomes
Resumo Objetivo Estudo prospectivo controlado em pacientes com discopatia degenerativa submetidos a artrodese intersomática lombar anterior instrumentada combinada com estabilização posterior. Métodos Amostra com64 pacientes consecutivos operados pelos mesmos cirurgiões ao longo de quatro anos. Metade das artrodeses intersomática lombar anterior fo
Rev. bras. ortop.. Publicado em: 03/06/2019
-
10. Clinical comparison between a percutaneous hydraulic pressure delivery system and balloon tamp system using high-viscosity cement for the treatment of osteoporotic vertebral compression fractures
OBJECTIVES: Osteoporotic vertebral compression fractures (OVCFs) affect the elderly population, especially postmenopausal women. Percutaneous kyphoplasty is designed to treat painful vertebral compression fractures for which conservative therapy has been unsuccessful. High-viscosity cement can be injected by either a hydraulic pressure delivery system (HPDS
Clinics. Publicado em: 30/05/2019
-
11. Development of fast dissolving tablets of flurbiprofen by sublimation method and its in vitro evaluation
Flurbiprofen belongs to Biopharmaceutical Classification System (BCS) class II drugs which are poorly soluble in water. The objective of present research work was to prepare fast dissolving tablets of Flurbiprofen using varying concentrations of three different sublimating agents to improve the dissolution rate. Seven formulations were prepared containing di
Braz. J. Pharm. Sci.. Publicado em: 08/04/2019
-
12. Coupled numerical simulation of a tailings deposit by FEM
Abstract Researchers have found that a valuable alternative for predicting the mechanical behavior of landfill construction is numerical simulation based on the finite element method. The results of such a numerical simulation for a sandy tailings deposit from the iron mining coupling flow and deformation are presented herein. This study investigates the inf
REM, Int. Eng. J.. Publicado em: 2019-03