Corrosion Test
Mostrando 1-12 de 136 artigos, teses e dissertações.
-
1. Development of a ceramic membrane for emulsion water-diesel treatment
Abstract The purpose of this study was the development of a low-cost ceramic tubular membrane, using inexpensive materials, namely natural clay, and graphite as a porogenic agent. Such a low-cost membrane can be used as filters or porous supports for the preparation of multilayer ceramic membranes. Extrusion was used as a shape-forming method for this purpos
Cerâmica. Publicado em: 2022
-
2. Corrosion Resistance of Stainless Steel Brackets After Thermal Recycling by Direct Flaming
Abstract Objective: To determine and compare the corrosion resistance (based on the release of nickel and chromium in artificial saliva) of various brands of stainless steel brackets after thermal recycling by direct flaming. Material and Methods: This research study employed 40 stainless-steel maxillary premolar brackets from different brands (Ormco, GAC,
Pesqui. Bras. Odontopediatria Clín. Integr.. Publicado em: 31/10/2019
-
3. The importance of corrosion resistance test of cannulas in the quality control of hypodermic needles
According to Anvisa risk rating, hypodermic needles offer medium risk to the user’s health. This study discussed the importance of the corrosion resistance test in tubes of hypodermic needles, in the product quality control. A review of cannulas of hypodermic needles was carried out according to ISO 9626:2003 and 9259:1997 ABNT NBR. For the results evaluat
Braz. J. Pharm. Sci.. Publicado em: 24/10/2019
-
4. Influence of Nb Content on Sensitization and Pitting Corrosion of Welded AISI 430 Ferritic Stainless Steel
Resumo Neste trabalho, o efeito da adição de Nb na sensitização e corrosão por pite de aço inoxidável ferrítico AISI 430 submetido à soldagem TIG foi investigado por caracterização microestrutural e técnicas eletroquímicas. As três regiões distintas do processo de soldagem, zona fundida, zona termicamente afetada e metal de base do aço AISI
Soldag. insp.. Publicado em: 07/10/2019
-
5. Effect of Ca Content on Properties of Extruded Mg-3Zn-0.5Sr-xCa Alloys for Medical Applications
Mg-3Zn-0.5Sr-xCa(wt.%) (x=0, 0.2, 0.5) alloys were fabricated by casting and hot extrusion. X-ray diffraction (XRD) and optical microscopy observation showed that the microstructure of Mg-3Zn-0.5Sr-xCa alloys was composed of α-Mg matrix and Mg17Sr2 phase precipitated along grain boundaries. The tensile strength of the alloy increased from 255MPa to 305MPa w
Mat. Res.. Publicado em: 30/09/2019
-
6. Desgaste y corrosión de recubrimientos de PLGA sobre titanio en contacto con hueso y fluido sinovial
ABSTRACT In this work, the synergism between wear and corrosion was evaluated in titanium specimens covered by PLGA. The tests were carried out in a tribocorrosion machine, taking into account two variables: scratch ve-locity and applied load. A bipotentiostat was adapted to obtain the potentiostatic curves and Tafel in resting, moving and wear-corrosion con
Matéria (Rio J.). Publicado em: 16/09/2019
-
7. Lime Addition Effect on Corrosion of Reinforced Mortar
ABSTRACT This study aims to investigate the effect of lime addition in cement mortar on corrosion resistance of carbon and galvanized steel reinforcements. Mixed mortars were studied containing three contents of lime (6.7, 13.3, and 26.3 wt.%). The water retention, incorporated air, and compression strength of reinforced mortars were determined. Immersion te
Matéria (Rio J.). Publicado em: 16/09/2019
-
8. Estudo da eficiência do Orbignya oleifera como inibidor verde de corrosão para aço com baixo teor de carbono comparado com inibidor comercial em solução HCl 1M
RESUMO O trabalho visa um estudo comparativo entre a eficiência do óleo de coco babaçu (Orbignya oleifera) utilizado como inibidor verde de corrosão e um inibidor comercial testados em aço ABNT 1020 em meio contendo ácido clorídrico. A avaliação foi realizada utilizando técnicas eletroquímicas de polarização linear aliado ao Método de Extrapola
Matéria (Rio J.). Publicado em: 16/09/2019
-
9. Nitretação por descargas elétricas da liga Ti-6Al-4V com adição de pó abrasivo SiC ao fluido dielétrico
RESUMO O processo de nitretação que usa Usinagem por Descargas Elétricas é um método que associa a capacidade de usinar superfícies complexas com a obtenção de tratamento termoquímico de nitretação. A fonte de nitrogênio é proveniente da uréia, que compõe o fluido dielétrico juntamente com água deionizada. A liga de titânio Ti-6Al-4V possui
Matéria (Rio J.). Publicado em: 16/09/2019
-
10. Effect of moringa and bagasse ash filler particles on basalt/epoxy composites
Abstract This study evaluated the effect of moringa and nano ash filler particles on mechanical, chemical corrosion and moisture absorption of basalt fiber/epoxy composites. Epoxy resin and Araldite HY951 hardener was used as matrix along with the inclusion of filler particles while the bi-directional woven basalt fiber mat was used as the reinforcement in f
Polímeros. Publicado em: 09/09/2019
-
11. Corrodibility and Adherence of Reinforced Concrete Rebars Electroplated with Zinc and Zinc-Nickel Alloys
Reinforced concrete is the main structural material used in the world in the construction of bridges, roads and commercial and residential buildings. One effective method for preventing corrosion of steel reinforcement is the application of galvanic coatings to the reinforcement itself. The present study evaluated the performance of three groups of reinforci
Mat. Res.. Publicado em: 15/07/2019
-
12. Detecção de corrosão em concreto armado com termografia infravermelha e ultrassom
Resumo A corrosão do aço é uma das principais manifestações patológicas em concreto armado. Sua detecção precoce pode evitar tanto custosos reparos quanto danos aos usuários. Este artigo propõe o uso da termografia infravermelha e do ultrassom para a detecção de corrosão em concreto armado. A metodologia consistiu na elaboração de 6 corpos de
Ambient. constr.. Publicado em: 10/06/2019