Cu Al Mn Alloys
Mostrando 1-12 de 12 artigos, teses e dissertações.
-
1. Impact of Alloy Composition and Thermal Stabilization on Martensitic Phase Transformation Structures in CuAlMn Shape Memory Alloys
Alloys of CuAlMn are known as cheap, high strength shape memory alloys with an excellent damping capacity within their austenitic-martensitic phase transformation, compared to alloy systems like NiTi, CuZnAl or MnCu. But CuAlMn alloys have disadvantage due to generation of voids by a high shrinkage which further increases the existing proneness to stress cra
Mat. Res.. Publicado em: 19/07/2018
-
2. Microstructural Characterization of a Laser Surface Remelted Cu-Based Shape Memory Alloy
Cu-based shape memory alloys (SMAs) present some advantages as higher transformation temperatures, lower costs and are easier to process than traditional Ti-based SMAs but they also show some disadvantages as low ductility and higher tendency for intergranular cracking. Several studies have sought for a way to improve the mechanical properties of these alloy
Mat. Res.. Publicado em: 12/04/2018
-
3. Microstructural and Electrochemical behaviour of Aluminium Alloy Composites Produced Using Different Sintering Techniques
Present research work analyses the effect of heating modes on the densification, microstructure and mechanical properties of aluminum alloys [65Al-20Cu-15Mn] fabricated through powder metallurgy route. Sintering of compacts using conventional, microwave and spark plasma sintering methods has been carried out at 525°C. From the results, it has been observed
Mat. Res.. Publicado em: 12/03/2018
-
4. Synthesis and Crystal Structure of Three New Quaternary Compounds in the system Cu-Mn-III-Se3 (III = Al, Ga, In)
Chalcogenide alloys CuMnAlSe3, CuMnGaSe3 and CuMnInSe3, new members of the semiconductor system I-II-III-VI3, were synthetized and structurally characterized by the Rietveld method using X-ray powder diffraction data. All compounds crystallize in the tetragonal space group P4 2c (Nº 112) with a CuFeInSe3-type structure.
Mat. Res.. Publicado em: 05/02/2018
-
5. Effects of Solidification Rate in the Microstructure of Al-Si5Cu3 Aluminum Cast Alloy
Aluminium alloy Al-Si5Cu3 (319) is one of the most commonly used casting alloys for automobile components, due to its casting characteristics. Iron is the major impurity element that influences the detrimental β-phase formation in secondary aluminum alloys. In the present study, we investigated the influence of the cooling rate on the formation of iron comp
Mat. Res.. Publicado em: 20/07/2017
-
6. Enhancement of Mechanical Properties of Aluminum and 2124 Aluminum Alloy by the Addition of Quasicrystalline Phases
A structural and mechanical characterization of pure aluminum and 2124 T6 aluminum alloy reinforced with quasicrystalline phases of composition Al65Cu20Fe15 and Al70.5Pd21Mn8.5 (%at.) were performed. The quasicrystalline phases were synthesized by arc melting and then milled to produce powder of the alloys, which were then mechanical mixed with the starting
Mat. Res.. Publicado em: 25/08/2016
-
7. Effect of Rapid Solidification and Addition of Cu3P on the Mechanical Properties of Hypereutectic Al-Si Alloys
The combined processes; rapid solidification, addition of Cu3P compound and heat treatments to improve the mechanical properties of the hypereutectic Al-13Si, Al-20Si and Al-20Si-1.5Fe-0.7Mn alloys (in wt. %) was studied. Optical microscopy and scanning electron microscopy were used to characterize the microstructures. The mechanical properties were evaluate
Mat. Res.. Publicado em: 22/08/2016
-
8. Changes in the properties of Cu-Al-Mn shape memory alloy due to quaternary addition of different elements
Advantages of Cu based shape memory alloy include amongst other features, high transformation temperature, low cost of production, ease in manufacturing processes and ability to vary the achieved properties through alloying additions. It has been often reported that these alloys are very sensitive to the alloying additions in terms of properties achieved and
Matéria (Rio J.). Publicado em: 2015-03
-
9. Estudo das propriedades termomecânicas da liga cu 78,3% - al 9,8% mn 11,9% / STUDY OF THE THERMOMECHANICAL PROPERTIES OF THE ALLOY Cu78,3% - Al9,8% - Mn11,9%
The alloys Cu 78,3% - Al 9,8% - Mn 11,9 and 77.5% Cu - Al 9.8% - Mn 11,9% -% Nb 0.5 - 0.3% Ni (wt%) were prepared without the use of protective atmosphere. The first alloy was characterized using optical microscopy, scanning electron microscopy, differential scanning calorimetry and X-ray diffraction and its mechanical property was determinated by the tensil
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 14/03/2012
-
10. Estudo da estabilizaÃÃo na liga Cu-Al-Mn com memÃria de forma
Este trabalho teve por objetivo estudar alguns tratamentos tÃrmicos para se eliminar ou inibir o processo de estabilizaÃÃo da martensita que à um fenÃmeno indesejado nas aplicaÃÃes tecnolÃgicas das ligas com memÃria de forma, provocando importantes alteraÃÃes nos fenÃmenos de memÃria de forma, resultando em importantes modificaÃÃes nos comport
Publicado em: 2006
-
11. Obtenção de ligas amorfas em volume : aplicações a ligas metalicas e a compostos intermetalicos magnetocaloricos / Production of bulk amorphous alloys : application an metallic alloys an magnetocaloric intermetallic compounds
O objetivo deste trabalho foi obter ligas amorfas em volume metálicas e magnetocalóricas através dos processos de centrifugação e injeção. Para isto foi necessária a construção de uma injetora em vácuo de ligas metálicas. Testes para confirmar a possibilidade de obtenção de novas ligas amorfas em volume através destes processos foram feitos co
Publicado em: 2006
-
12. Dissolução eletrolítica de ligas de alumínio em cavacos e determinação dos elementos constituintes por espectrometria de emissão atômica com fonte de pasma (ICP-OES) / Electrolytic dissolution of aluminum alloys (Chip form) and multi-element determination by inductively coupled plasma optical emission spectrometry (ICP-OES)
Several aluminum alloys with different chips size were dissolved using aqua regia (HCl:HNO3,3:1). The residues of the dissolution procedure were either rejected or used in silicon volatilization with hydrofluoric acid before determination of Fe, Cu, Mn, Mg, Cr, Ni, Zn, Pb, Sn, Ti and Zr by ICP-OES. The influence caused by crescent amounts of aluminum in the
Publicado em: 2001